C315.K.250.C

What Is the Chair Scale Used for?

The chair scale is used to weigh a patient in a sitting position, which is enforced by his medical condition. The scale is used in healthcare facilities, mainly in hospitals.

How Do I Determine my BMI on a Chair Scale?

The BMI (Body Mass Index) can be determined using a chair scale. This index is obtained by dividing the value of body weight, given in kilograms, by the value of height squared, given in metres. The range of BMI values was developed with adults in mind, which means that it cannot be applied to children’s weight and height.

You should monitor your BMI for a number of reasons – both health and preventive. Among these are type II diabetes, atherosclerosis, heart attack risk, diet and health care.

Why choose RADWAG chair scales?
Because...

They enable easy patient transport

Chair scales are equipped with four wheels which allow patients to reach their destination easily, quickly and comfortably. The rear wheels are equipped with a brake to immobilise the scale. This solution guarantees safety, especially for patients on uneven surfaces.

Have an internal rechargeable battery

The rechargeable battery is independent of external power supply conditions and is therefore of considerable importance in a hospital environment. It is sufficient for up to 8 hours.

Are verified

The chair scale has a verification.

Record a momentary (frozen) weighing result

Chair scales and other scales for healthcare have a working mode of weighing the patient with a frozen result. This function allows the patient’s weighing result to be recorded and returned to at any time in the future. The purpose can be for weight analysis, for example comparative weight studies.

Have a time switch

Chair scales allow you to set a time to switch off the device automatically. Thanks to the automatic switch-off, you don’t have to remember, for example, to shut down the scale after finishing work.

Are user-friendly

The chair scale has a PUE C315 terminal equipped with an energy-saving LCD display. The display is backlit and easy to read regardless of the setting angle.

Secure measurements

Chair scales are equipped with an ALIBI memory that automatically records copies of measurements, allows them to be viewed and archived, and prevents them from being modified or erased. Chair scales guarantee safe measurements.

Allows taring over the entire measuring range

Full range taring measuring range makes it possible to determine the weight of the patient on the scale only.

Datasheet

Maximum capacity [Max]	250 kg
Readability [d]	100 g
Tare range	-250 kg
OIML Class	III
Display	LCD (backlit)
Packaging dimensions	800×620×1100 mm
Net weight	20 kg
Gross weight	28 kg
Communication interface	RS232
Power supply	100 – 240 V AC 50/60 Hz and battery
Power consumption max.	5 W
Operation time on batteries	up to 8 h
Operating temperature	0 – +40 °C
Relative humidity	10% – 85% RH no condensation

Additional fee
for verification

According to MDR regulations, this scale is not a medical device.

Videos

Scale chair

Functions

Internal battery

Internal and rechargeable battery of SLA 6 V type (sealed lead acid) enables device operation without connecting the device to the mains (9h operation). The weighing instrument controls battery status and displays a respective pictogram on the screen.

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

BMI

The BMI is defined as the body mass divided by the square of the body height, and is expressed in units of kg/m2, resulting from mass in kilograms and height in metres.

Documentation

Datasheet

Data Sheet

Show me

Download

Choose more product:
Show me

Show me

Download

User Manuals

Start up Guide

Show me

Download

(0.71 MB)