NANO.AK

NANO.AK-4/500.5Y Automatic Nano-Mass Comparator

Do You Carry out Calibration Procedures? Do You Need the Most Precise Device?

RADWAG’s Automatic Nano-Mass Comparator NANO.AK-4/500.5Y is a device for automatic determination of mass deviations of mass standards with minimum operator involvement.

✓ Possibility of standards comparison in the range of 0.05 mg to 500 mg

✓ 4-position mass standard magazine

✓ Highest readability: 10 ng

✓ Repeatability of 0.04 µg

✓ Full history of calibrations with filterable results

✓ Remote operation of the comparator terminals

all this is guaranteed by our NANO.AK-4/500.5Y comparator.

Best Measurement Repeatability

The NANO.AK-4/500.5Y automatic nano-comparator, thanks to the elimination of the “human factor” as well as air drafts and temperature changes, is characterised by the highest repeatability of measurements – significantly better than manual comparators.

Design and Functionality

The monitoring element of the comparator is a digital module with an automatic mass loader located in the comparator chamber. Operation takes place via a mass display connected to the comparator controller. The supervisory elements are not mechanically integrated into the structure, so that the comparator chamber can be isolated from external influences.

Dedicated Software

A dedicated computer programme, RMCS, is used for the comprehensive implementation of calibration procedures in the laboratory. RMCS manages the entire calibration process – from the acceptance of the order, through the execution of the procedure to the issuing of the calibration certificate. The RMCS stores the data of all equipment in its database and will remind you of expiring certificates. A file store allows you to store certificates and calibration documentation in the database and assign them to orders. The template for each report and certificate can be conveniently adapted to the needs of your laboratory.

Datasheet

E1 Calibration Range	0.05 – 500 mg
E2 Calibration Range	0.05 – 500 mg
F1 Calibration Range	0.05 – 500 mg
F2 Calibration Range	0.05 – 500 mg
Maximum capacity [Max]	510 mg
Readability [d]	10 ng
Standard repeatability [5% Max]	0.04 µg
Standard repeatability [Max]	0.06 µg
Permissible repeatability	0.1 µg
Eccentricity (tested load)	0 mg
Electric compensation range	0 – 510 mg
Stabilization time	30 s
Adjustment	external
Display	10″ graphic colour touchscreen
Weighing pan dimensions	ø20 mm
Weighing device dimensions	385×245×390 mm
Controling device dimensions	460×250×195 mm
Packaging dimensions	860×750×570 mm
Net weight	21 kg
Gross weight	31 kg
Supplementary weights internal	-
Supplementary weights external	-
Magazine positions	4
Communication interface	2×USB-A, USB-C, HDMI, Ethernet, Wi-Fi^®, Hotspot
Power supply	100 – 240 V AC 50/60 Hz
Operating temperature	+15 – +30 °C
Operating temperature change rate	±0.5 °C / 12 h (±0.3 °C / 4 h)
Relative humidity	40% – 60%
Relative humidity change rate	±5% / 12 h (3% / 4 h)

Repeatability is expressed as a standard deviation determined for 6 ABBA cycles. Standard deviation is experimentally determined under ambient conditions for calibration of E1 class mass standards specified in OIML R111 (Table C.1.) document.

Videos

Precision and Working Comfort – Operating RADWAG Balances in Every Glove!

5Y Balance and Barcode Scanner – Easy Connection

New Menu Language in 5Y Series Balances: Japanese

ELLIPSIS – New Balance by RADWAG

ELLIPSIS – Cutting Edge, Innovative, New

310 ELLIPSIS – Scan or Tap to Log In

Remote VPN Support on ELLIPSIS Balances

ELLIPSIS – Unlimited Connections

RADWAG Mass Comparators

The future is already here

RMCS - Radwag Mass Comparator System