Automatic Comparator for Determination of Mass standard's Density and Volume 1110g d:0,01 mg AGV-8 1000.5Y

AGV-8 1000.5Y Automatic Comparator for Determination of Mass standard's Density and Volume

The AGV-8 1000.5Y Automatic Comparator for Determination of Mass Standard’s Density and Volume determines the density and volume of mass standards in class E1 in accordance with OIML R111. The highest readability and measurement stability in the range from 1 g to 1 kg are its assets.

8-Position Mass Standard Magazine

The instrument allows the density of up to seven test weights to be determined using a single reference standard. It is equipped with a circulator for eliminating air bubbles. The wire-suspended weighing pan minimises eccentricity error and the influence of liquid surface tension.

Weighing in Air and in Liquid

The AGV comparator uses the most accurate method for determining the density of mass standards, which involves weighing the mass standard “in air” and then in a liquid of known density.

Three-Point Temperature Measurement

The AGV comparator is equipped with a high-performance thermometer with a resolution of 0.001°C with three liquid temperature sensors. By measuring at three points in the container (at the bottom, middle and surface), you are able to see the difference and, if necessary, mix and equalise the temperature of the liquid in the container. Otherwise, there is a risk of obtaining incorrect density measurement results.

Anti-Draft Chamber

A component that insulates the measurement results from external influences (gusts, draughts) is the anti-draft chamber. It makes measurements more accurate and stable.

Density Determination Software

With the comparator, you receive a computer with density determination software installed. The software allows the density of mass standards to be determined and the uncertainty to be calculated using A method in accordance with OIML R111. In addition, it allows the density of liquids to be verified.

Ergonomic Operation

A 10’ colour touchscreen display makes the instrument comfortable to use. Easy access to numerous applications and weighing functions is guaranteed by the ability to personalise the home screen according to user needs. The terminal is equipped with two programmable proximity sensors to which you can assign any function.

Datasheet

E0 Calibration Range	1 g – 1 kg *
E1 Calibration Range	1 g – 1 kg
Maximum capacity [Max]	1110 g
Readability [d]	0.01 mg
Standard repeatability [5% Max]	0.04 mg
Standard repeatability [Max]	0.05 mg
Permissible repeatability	0.08 mg
Linearity	±0.12 mg
Electric compensation range	-10 g – +110 g
Stabilization time	30 s
Adjustment	external
Display	10″ graphic colour touchscreen
Weighing pan dimensions	ø60 mm
Object diameters	5 – 94 mm
Weighing device dimensions	690×710×1060 mm
Supplementary weights external	500 g, 300 g, 100 g, 100 g
Magazine	8
Power supply	100 – 240 V AC 50/60 Hz
Operating temperature	+15 – +30 °C
Storage temperature	-20 – +50 °C
Operating temperature change rate	±0.5 °C / 12 h (±0.3 °C / 4 h)
Relative humidity	40% – 60%
Relative humidity change rate	±5% / 12 h (3% / 4 h)

Repeatability is expressed as a standard deviation determined for 6 ABBA cycles. Standard deviation is experimentally determined under ambient conditions for calibration of E1 class mass standards specified in OIML R111 (Table C.1.) document.

Videos

Remote VPN Support on ELLIPSIS Balances

ELLIPSIS – Unlimited Connections

310 ELLIPSIS – Scan or Tap to Log In

ELLIPSIS – New Balance by RADWAG

ELLIPSIS – Cutting Edge, Innovative, New

Precision and Working Comfort – Operating RADWAG Balances in Every Glove!

New Menu Language in 5Y Series Balances: Japanese

RADWAG Mass Comparators

RMCS - Radwag Mass Comparator System

Documentation

Datasheet