Moisture Analyzer 210g d:1 mg MA 210.X7.IC.A

MA 210.X7.IC.A Moisture Analyzer

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of relative moisture content,
dry mass content and other parameters in samples of different substances.

MA.X7.IC.A series

is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors.

Such solution allows:

Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing.
Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity.
Achieving high repeatability of opening and closing the drying chamber.
Enhancing drying process automation.
Enhancing safety of operation by eliminating contact with hot components of drying chamber.
Improving operation ergonomics.

MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product.

Highlights of X7 Series moisture analyzers:

Automatic opening and closing of the drying chamber
7” capacitive colour touchpad
Modern interface
Uncomplicated, intuitive operation
Programmable display
Drying profiles (standard, mild, step, fast)
GLP/GMP printouts-reports
Repeatable and customized applications
Work optimization due to the use of halogen lamps

Capacity and
temperature

MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature).

An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather.

Databases

Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis.

Collected data is registered in 8 databases:

Products (5 000 products)
Users (100 users)
Packaging (100 packaging types)
Customers (1 000 customers)
Drying programs (200 drying programs)
Drying process reports (10 000 drying process reports)
Ambient conditions (10 000 records)
Weighings (50 000 records).

The results

The results obtained using the moisture analyzer (the final result of the drying process):

% M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage,
% D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated,
% R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process,
g – the sample mass after drying.

Interfaces

USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer.

Remote access to the moisture analyzer allows for online data management.

Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Datasheet

Maximum capacity [Max]	210 g
Readability [d]	1 mg
Tare range	-210 g
Adjustment	internal (automatic)
Maximum sample weight	210 g
Heating module	IR emitter
Moisture content repeatability	±0.05 % (sample ~ 2 g), ±0.01 % (sample ~ 10 g)
Moisture content readability	0.001 %
Drying temperature range	Max 160 °C
Leveling system	manual
Display	7″ graphic colour touchscreen
Weighing chamber	automatic
Maximum sample height	20 mm
Weighing pan dimensions	ø90, h= 8 mm
Packaging dimensions W x D x H	476×381×346 mm
Net weight	5.4 kg
Gross weight	6.9 kg
Protection class	IP 43
Database capacity	Products, Users, Packaging, Customers, Drying programs, Drying process reports, Ambient Conditions, Weighings
Display mode	%D, %M, %R, g
Drying method	4 drying profiles (standard, fast, step, mild)
Finish mode	4 modes (automatic, manual, time-defined, user-defined)
Additional functions	sample traceability
Communication interface	RS232¹, USB-A, USB-B, Ethernet, Wi-Fi^®
Power supply	100 – 120 V AC 50/60 Hz or 200-240 V AC 50/60 Hz
Power consumption	6 W
Heating module power	450 W
Operating temperature	+10 – +40 °C
Mass indication control	External mass standard 50g, 100g, 200g, depending on the type of moisture analyzer (additional equipment)
Drying temperature adjustment	Three-point adjustment at defined temperatures, programmable values (additional equipment: GT105k-12/Z Control Thermometer)
Drying temperature control	One- or two-point, depending on the drying profile (additional equipment: GT105k-12/Z Control Thermometer)
Moisture content indication control	Certified MV Test Set (additional equipment)

¹ Barcode scanners, available as weighing instrument accessory, communicate with the instrument via RS232 interface exclusively.

360°

Videos

MA.X7 - Drying Process Using Drying Programs Database

MA.X7 - Drying Process Performed by Drying Process Wizard

MA.X7 - Drying Process Performed by Means of Quick Menu

Validation of Moisture Analyzers with Sodium Chloride

New X7 Balances. AS X7 Analytical Balances and PS X7 Precision Balances

Measurement of Samples of High Moisture Content

Functions

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.

Replaceable unit

Weight function to change the weight unit.

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

Drying modes

Method for obtaining maximum drying temperature. There are 4 drying profiles: standard, mild, step, fast. The profiles differ by which ensure various dynamics of temperature increase.

Samples drying

Drying process enables to determine moisture content of a given sample by evaporating its free water and other components. The sample's moisture content [%M] is determined by means of precise weighing carried out before and during the drying process.

Moisture content analysis

Determination of sample's moisture content.

Dry mass determination

Determination of product mass after completed technological, physical and chemical processes enforcing product moisture evaporation. RADWAG moisture analyzers are designed to test the moisture content by heating of the samples, which is done using an IR emitter, a halogen or a metal heater.

Wi-Fi^®

Thanks to wireless communication between the computer and a balance, it is possible to use a balance inside a laminar flow hood and a fume cupboard.

Documentation

Datasheet

Data Sheet

Show me

Download

Choose more product:
Show me

Show me

Download

Drivers

RADWAG USB DRIVER 1.6.2 (1.25 MB)

Download

Accessories

RS 232 cables (scale - printer)

Accessories

Cable P0151

Accessories

Cable P0108

Cable P0108.5

RS 232 – RS 485 Converter

Accessories

KR-01 Converter

Accessories

RTP-UEW80 Radwag Thermal Receipt Printer (USB + Ethernet + WiFi)

RTP-RU80 Radwag Thermal Receipt Printer (RS232 + USB)

Accessories

SAL/STONE/H Stainless Steel Antivibration Table

SAL/STONE/C Antivibration Table

SAL/C Laboratory Antivibration Table

Alibi Reader

Accessories

Alibi Reader

E2R System

Accessories

E2R Moisture Analyzers

Scales Editor 2.1

Accessories

Scale Editor 2.1

Accessories

Fabric Dust Cover for MA R, MA X2 Moisture Analyzers

Glass Fibre Filters

Transport Case for MA X2, MAR Moisture Analyzer

GT105k-12/Z Control Thermometer

Disposable Pans

Water Vapour Permeability Determination Set

MV Test Set

Voluminous Sample Container

Barcode scanners

Accessories

LS2208 Barcode Scanner

RAD-KEY

Accessories

RAD Key

RADWAG Development Studio

Accessories

RADWAG Development Studio

Protective cover for balances

Accessories

Protective Cover for X7 Balance

Accessories

21 CFR Part 11 Compliance Module (X2)

RES Radwag Extended SI Module (X2)

Drying Parameters

Drying Parameters for MAC and MAX3

Chemical industry	Fruit and vegetable	Bakery industry
Agricultural industry	Food industry	Plastics
Dairy products	Other

CAUTION
The analysis was carried out at customer request on selected models of moisture analyzers. RADWAG guarantees identical result of tests carried out on all versions of moisture analyzers.

Drying Parameters for MA 3Y, MA 5Y, MA X2, MA X7 and MA R3

Chemical industry	Fruit and vegetable	Bakery industry
Agricultural industry	Food industry	Plastics
Dairy products	Other

CAUTION
The analysis was carried out at customer request on selected models of moisture analyzers. RADWAG guarantees identical result of tests carried out on all versions of moisture analyzers.

Drying Parameters for PMV3