Show me
DownloadMoisture Analyzer with 10″ ELLIPSIS Terminal
Looking for a moisture analyzer that determines moisture or dry matter content with impressive accuracy, and also performs a digital audit, responds to voice commands and communicates with you through ambient light?
The RADWAG MA 5Y moisture analyzer from the ELLIPSIS series offers four drying profiles, four drying finish modes, drying temperatures of up to 160 °C, advanced user verification and full compliance with 21 CFR Part 11.
Discover the functionality of the ELLIPSIS series of moisture analyzers:
MA 5Y Moisture Analyzer – Key Features
- 4 drying profiles: standard, mild, fast and step
- Drying temperature up to 160 °C
- 4 drying finish modes: automatic, manual, time-defined and user-defined
- 10″ ELLIPSIS terminal with widgets, graphs, statuses and measurement history
- User verification: password, RFID card, fingerprint and face recognition
- 21 CFR Part 11 / EU GMP Annex 11 compliance for the pharmaceutical industry
- Modbus TCP/IP communication for automation integration
Four Drying Profiles for Accurate Moisture Content Determination
The MA 5Y moisture analyzer offers you four drying profiles: standard, mild, fast and step. Choose the one that suits your sample.
- The standard profile is the drying profile used most often. It allows the most accurate determination of moisture content.
- The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat at full power at the initial stage of the process. An example of such a substance is leather.
- Use the fast profile for samples with significant moisture content – of the order of even several tens of percent.
- The step profile is ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You choose the temperature values and heating duration experimentally.
What Drying Temperature Should I Set? Up to 160 °C
The drying temperature determines the duration of the moisture determination process, and its value depends on the type of material. A temperature that is too low under-dries the sample and unnecessarily increases the measurement time, while a temperature that is too high burns the material. For the traditional (oven) method, the drying temperature is determined by industry or factory standards. If there are no standards, you select the temperature experimentally.
The MA 5Y moisture analyzer allows drying at temperatures of up to 160 °C.
How Do I Finish the Drying? Four Finish Modes
The MA 5Y moisture analyzer has four finish modes: automatic, manual, time-defined and user-defined.
-
Automatic mode
You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement ends automatically. -
Manual mode
You terminate the measurement yourself by pressing the STOP button. -
Time-defined mode
The measurement ends after the set time has elapsed, regardless of the result. You have up to 99 hours 59 minutes to manage! -
User-defined mode
When all volatile components are removed from a sample, its mass should by definition be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), all volatile components are considered to have been removed from its structure.
10-Inch ELLIPSIS Terminal Display
A bigger 10″ screen means more information in one place. On the new ELLIPSIS terminal you see up to 3 screens, widgets, graphs, statuses, notes and a handy measurement history. The terminal also confirms that your moisture analyzer is ready for use, and informs you when the analyzer needs an inspection or a periodic audit of its accuracy and sensitivity.
Uncompromising User Verification: Password, RFID, Fingerprint, Face Recognition
For the first time ever, the moisture analyzer verifies the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. ELLIPSIS works with RFID tags* that you can use to tag your products or formulation ingredients in the database. They can also be used to identify a user.
Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User
The colour of the light tells you about the status of the moisture analyzer, process results, procedures and alerts – at a glance, even from a distance.
Hotspot – Use the Moisture Analyzer From Your Smartphone, Tablet or Computer
Use the moisture analyzer on any device connected to it – a smartphone, tablet or computer.
Live Note – Note Down Your Conclusions
For the first time you can add a text memo to a measurement series or procedure report. These can be, for example, assumptions, reminders or questions that you can return to at any time.
21 CFR Part 11 & EU GMP Annex 11 Compliant Moisture Analyzer
Do you work in the pharmaceutical industry and need electronic signatures? As a standalone device, this moisture analyzer fully meets the requirements of 21 CFR Part 11 / EU GMP Annex 11:
- Full data security
- Electronic signatures
- Validations
- Electronic records
- Audit trails
Modbus TCP/IP – Easy Integration With Industrial Automation
Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators.
A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device, which is most often a PLC. The Modbus TCP/IP protocol in the 5Y balances and CY10 scales enables, among other things, mass readout, zeroing and taring of the device, as well as tare settings and MIN and MAX thresholds.
* RFID ISO/IEC 14443 Type A, 13.56 MHz
Albanian
Danish
Nederlandse
Estonian
Finnish
Hungarian
Icelandic
Kazakh
Latvian
Lithuanian
Macedonian
Norwegian
Portuguese
Romanian
Russian
Slovak
Slovenian
Swedish
Ukrainian
Serbian
Montenegrin
Português (Brasil)
Deutsch
Español
Français
Italiano
Japanese (日本語)
Polski
Türkiye
Česky
中文
