MPS 2000.Y Weighing Module

Overview

MPS Y device consists of the electromagnetic module of high resolution and Y operation panel equipped with LCD. It has been designed to be easily integrated into customer-owned weighing systems, and therefore can be built either into technological line or inside weighing devices or laboratory equipment. The MPS Y allows to perform the measurements using the under-pan weighing method or a regular weighing pan. In case of the under-pan method the load is suspended beneath the module.

By cause of high measurement accuracy, it is recommended to install the module inside customer's device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result.

The MPS module comes standard with a dedicated power supply.

Features:

Brand new design of the electromagnetic mechanism housed in an aluminium enclosure,
Readability of 0.01 g,
Ease of adaptation to the required storage space,
Internal adjustment,
Various options of hardware configuration.

The Y panel functionality is remarkable thanks to use of numerous interfaces: 2×RS232, 2xUSB type A, Ethernet, 4×IN, 4×OUT, Wi-Fi^®.

MPS.Y can also be integrated with E2R Weighing Records and E2R PGC.

Wi-Fi^® is a registered trademark of Wi-Fi Alliance^®.

Datasheet

Maximum capacity [Max]	2000 g
Minimum load	20 mg
Readability [d]	1 mg
Tare range	-2000 g
Repeatability	0.5 mg
Linearity	±4 mg
Stabilization time	3 s
Adjustment	internal (automatic)
Display	5.7” Resistive Color Touchscreen
Weighing pan dimensions	ø115 mm
Device dimensions	293×190×112 mm
Packaging dimensions	610×340×285 mm
Net weight	4.8 kg
Protection class	IP 32
Housing	aluminum
Communication interface	2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digital), Wi-Fi^®
Power supply	100 – 240 V AC 50/60 Hz
Operating temperature	+10 – +40 °C
Relative humidity	40% – 80%