Automatic Susceptometer 50kg 0,000001g SM 5Y.A

SM 5Y.A Automatic Susceptometer

What is the Automatic Susceptometer Used for?

The instrument is designed to measure the magnetic susceptibility and permanent magnetization of mass standards of class E1 and below with the readability [d] of 1 µg, in accordance with OIML R111. The SM 5Y.A allows automatic change of magnet polarity and pan level depending on the class of mass standard being tested. Any positive or negative information on the magnetic susceptibility and polarity of the tested mass standard is stored in the database.

Why Does Automatic Mean Better?

The adjustment is done automatically (internally), which means that it is carried out by the susceptometer itself. This procedure is more precise than the manual one, but precision is not its only advantage. Automatic adjustment saves time and money for the user, who does not need to have an external mass standard and regularly check its condition. Both steps are necessary for external adjustment, i.e. performed manually by the operator.

Fully Automatic Change of Magnet Polarity

The program guides you through the process of checking the magnetic properties of the sample tested and then at the appropriate moment it will change the magnet’s polarity and finally display the test result.

Changing Measuring Ranges

The device has three automatic height levels that determine the distance of the weighing platform from the centre of the magnet. It simultaneously defines the strength of the magnetic field which the mass standard is tested in.

On the Best Foundations: the 5Y Terminal

The automatic susceptometer was built on the foundation of the 5Y terminal, which stands out among other laboratory terminals because it provides:

21 CFR Part 11 compliance
Digital Weighing Auditor
4+ login methods (password, fingerprint, face recognition, RFID* and combinations)
Handy Library with measurement history always at the fingertips
Live Notes
Ambient Light
Wide selection of widgets, databases, working modes and communication interfaces, including hotspot.

What Interfaces Does the Susceptometer Have? Peripherals You Can Easily Connect to

Thanks to the 5Y terminal, your susceptometer will connect to:

Computer and laptop (Ethernet, Wi-Fi^®®, USB-A)
Smartphone and tablet (hotspot)
Printer (Ethernet, Wi-Fi^®®, USB-A)
Barcode scanner (USB-A)
Additional screen (HDMI)
Any PC software (RADWAG communication protocol)
Spreadsheet (USB-C, Free Link)
Keyboard
Mouse.

* RFID ISO/IEC 14443 Type A, 13.56 MHz

Wi-Fi^® is a registered trademark of Wi-Fi Alliance^®.

Datasheet

E1 Calibration Range	2 g – 50 kg
E2 Calibration Range	2 g – 50 kg
F1 Calibration Range	2 g – 50 kg
F2 Calibration Range	2 g – 50 kg
Maximum capacity [Max]	50 kg
Readability [d]	1 µg
Stabilization time	10 s
Adjustment	internal (automatic)
Calibration Range	2 g – 50 kg
Distance platform Z0	20; 27; 43 mm
Magnetizing field strenght	2000, 800, 200 A/m
Display	10″ graphic colour touchscreen
Weighing chamber doors	automatic
Weighing pan dimensions	ø300 mm
Device dimensions	525×350×250 mm
Packaging dimensions	950×750×750 mm
Net weight	26 kg
Gross weight	36 kg
Dipole moment of magnets	≤ 0.1 Am2
Communication interface	2×USB-A, USB-C, RS 232 (COM3), HDMI, Ethernet, Wi-Fi^®, Hotspot
Operating temperature	+15 – +30 °C
Operating temperature change rate	±0.5 °C / 12 h
Relative humidity	40% – 60%
Relative humidity change rate	±2% / 4 h
Housing	ABS plastic
Processor	2×1 GHz
Memory	RAM 256 MB DDR2, 16GB – microSD

Repeatability is expressed as a standard deviation determined for 6 ABBA cycles. Standard deviation is experimentally determined under ambient conditions for calibration of E1 class mass standards specified in OIML R111 (Table C.1.) document.

Videos

Measurement of Magnetic Susceptibility and Polarisation of Mass Standards

Documentation

Datasheet

Data Sheet

Show me

Download

Choose more product:
Show me

Show me

Download

User Manuals

Software Manual

Show me