H315.30/60.H3.M Paslanmaz Çelik Yük Hücreli Su Geçirmez Terazi

Su geçirmez platformlu teraziler nemli ve doğrudan su ile temas olun koşullarda kullanılmak üzere tasarlanmıştır.

H315/H serisi

H315/H serisi, LCD display ve paslanmaz çelik tartım platformuna sahiptir. Terazinin yapısındaki bütün parçalar OH18N9 paslanmaz çelikten yapılmıştır. PUE H315 terminali bir dikme üzerine yerleştirilmiştir.

H315/H serisi teraziler şebekeden beslenir ve RS232 çıkışı seri olarak sunulur.

Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Maksimum yük [Max]	30 / 60 kg
Minimum yük [Min]	200 g
Okuma içinğruluğu [d]	10 / 20 g
Yasallaştırma birimi [e]	10 / 20 g
Dara aralığı	-60 kg
OIML sınıfı	III
Display	LCD (aydınlatma ile)
Tartım kefesi boyutları	410×410 mm
Ambalaj boyutları	510×510×270 mm
Net ağırlık	15,5 kg
Brüt ağırlık	17,3 kg
IP Sınıfı	IP 67 konstrüksiyon, IP 68 (1h max)/69 terminal
Haberleşme arayüzü	RS232, USB
Opsiyonel arayüzler	RS232 veya RS485 veya 4IN/4OUT veya Ethernet veya analog çıkış 4-20 mA
Güç kaynağı	100 – 240 V AC 50/60 Hz
Opsiyonel güç kaynağı	dahili batarya
Batarya ile çalışma süresi	max 7h
Çalıştırma sıcaklığı	-10 – +40 °C
Atmosferik nem	10% – 85% RH yoğunlaşma yok

H315.30/60.H3.M Paslanmaz Çelik Yük Hücreli Su Geçirmez Terazi