WPY 3/6.F1.K.PUK Terazi

✆
Radwag Terazileri İleri Tartım Teknolojileri
Yeni ürünlerYeni ürünler
Selected language Türkiye
Ana Sayfa > Ürün > İlaç ve Biyoteknoloji Çözümleri > PUK kontrol terazileri > İstatistiksel kontrol terazileri > WPY 3/6.F1.K.PUK Terazi
WPY 3/6.F1.K.PUK Terazi
This image is for reference only.

WPY 3/6.F1.K.PUK Terazi

Ürün kodu: WK-308-1049
Modeli değiştirin (13)
done
WPY 3/6.F1.K.PUK Terazi
Max: 3 / 6kgd: 1 / 2g

⤢

 300×300mm
expand_more
WPY 0.6/1.5.D2.PUK Terazi
Max: 0,6 / 1,5kgd: 0,2 / 0,5g

⤢

 195×195mm
WPY 1,5/3.D2.PUK Terazi
Max: 1,5 / 3kgd: 0,5 / 1g

⤢

 195×195mm
WPY 3/6.F1.R.PUK Terazi
Max: 3 / 6kgd: 1 / 2g

⤢

 300×300mm
WPY 3/6.D2.PUK Terazi
Max: 3 / 6kgd: 1 / 2g

⤢

 195×195mm
WPY 6/15.F1.K.PUK Terazi
Max: 6 / 15kgd: 2 / 5g

⤢

 300×300mm
WPY 6/15.F1.R.PUK Terazi
Max: 6 / 15kgd: 2 / 5g

⤢

 300×300mm
WPY 15/30.C2.K.PUK Terazi
Max: 15 / 30kgd: 5 / 10g

⤢

 400×500mm
WPY 15/30.C2.R.PUK Terazi
Max: 15 / 30kgd: 5 / 10g

⤢

 400×500mm
WPY 15/30.F1.K.PUK Terazi
Max: 15 / 30kgd: 5 / 10g

⤢

 300×300mm
WPY 15/30.F1.R.PUK Terazi
Max: 15 / 30kgd: 5 / 10g

⤢

 300×300mm
WPY 30/60.C2.K.PUK Terazi
Max: 30 / 60kgd: 10 / 20g

⤢

 400×500mm
WPY 30/60.C2.R.PUK Terazi
Max: 30 / 60kgd: 10 / 20g

⤢

 400×500mm
Maksimum yük [Max]: 3 / 6 kg
Okuma doğruluğu [d]: 1 / 2 g

close
Modeli değiştirin:
✓ WPY 0.6/1.5.D2.PUK Terazi
✓ WPY 1,5/3.D2.PUK Terazi
✓ WPY 3/6.F1.K.PUK Terazi
✓ WPY 3/6.F1.R.PUK Terazi
✓ WPY 3/6.D2.PUK Terazi
✓ WPY 6/15.F1.K.PUK Terazi
✓ WPY 6/15.F1.R.PUK Terazi
✓ WPY 15/30.C2.K.PUK Terazi
✓ WPY 15/30.C2.R.PUK Terazi
✓ WPY 15/30.F1.K.PUK Terazi
✓ WPY 15/30.F1.R.PUK Terazi
✓ WPY 30/60.C2.K.PUK Terazi
✓ WPY 30/60.C2.R.PUK Terazi
Select all
Bakış
İndirme
Request a quote
Karşılaştırmak için ürün ekleyin Advanced Search
Genel Açıklama
 

Paketlenmiş ürün kontrol WPY terazisi

 
WPY/PGC paketlenmiş ürünlerin kontrolünü uygulamaya koyan modüller ile donatılmıştır. Bu modül, ürünlerin ve operatörlerin listesini ihtiva eden veri tabanı ile desteklenir. Terazi tarafından başlatılan kontrol, önceden belirlenmiş miktardaki paket  (örnek)  kontrol edildikten sonra otomatik olarak durur. Ürün parti büyüklüğüne bağlı olarak, paket sayısı terazi programı tarafından belirlenir.  Teraziler, yapılan kontrol ve sonuçları ile ilgili bilgilerin ön izlenmesini sağlayan, renkli, 5,7” grafik dokunmatik ekran ile donatılmıştır.
 
 
 
 

Kontrol döngüsü aşağıdaki şemaya göre çalışır:

  • Operatör seçimi
  • Ürün seçimi
  • Kontrol başlangıcı
  • Tartım kayıtları elde etmek
  • Belli sayıdaki paketten sonra otomatik kontrol durur
  • Kontrol raporu yazdır.
Yapılan her kontrol, paketlenmiş ürünlerin kontrol raporu için gerekli olan bilgileri içeren nihai raporla biter. Rapor, terazinin belleğinde otomatik olarak saklanır ve aynı zamanda, teraziye bağlı olan yazıcıda yazdırılır.
 
 
 
 

Bilgisayar programı ile bağlantılı terazi aşağıdakileri sağlar:

  • Ardışıl tartmaların tartım kayıtlarının veri tabanında tutulması,
  • Bilgisayar yazılımı üzerinden otomatik olarak kontrol proses çıktısı,
  • Teraziden bilgisayar yazılımına kullanıcı tanımlı kodları göndermek; kodlar tartılmış ürünler ile eşleşir (ürün kodu, operatör kodu, parti miktarı, parti numarası, kontrol start/stop),
  • Bilgisayar yazılımı üzerinden ürün kodu tanımlama ve açıklama (isimler), böylece kullanıcı şirketin bölümüne uygun tekil ürün ismi atayabilir.
 

 

Kantarın amacı önceden paketlenmiş ürünleri (KTP) kontrol etmektir, bu nedenle yasallaştırmanın gerekli olduğunu unutmayın.
Uygun yasallaştırmaya sahip bir terazi sipariş etmenizi öneririz.
 
 
 
Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications
Teknik Veriler
Maksimum yük [Max]

3 / 6

 kg

Minimum yük [Min]

20 / 40

 g

Okuma içinğruluğu [d]

1 / 2

 g

Dara aralığı

-6

 kg

OIML sınıfı

III

 

Display

5,7” dirençli renkli dokunmatik ekran

 

Kablo uzunluğu

1

 m

Tartım kefesi boyutları

300×300

 mm

Ambalaj boyutları

570×390×170

 mm

Haberleşme arayüzü

2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (dijital), Wi-Fi®

 

Güç kaynağı

100 – 240 V AC 50/60 Hz

 

Çalıştırma sıcaklığı

-10 – +40

 °C

Atmosferik nem

10% – 85% RH yoğunlaşma yok

 

CE
2 yıl garanti
Automatic Scales verification
Packaged Goods Control
Videolar
Complete Solutions for Mass Measurement in Pharma Industry
Fonksiyonlar
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Labelling

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).
Plus/Minus Control

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Totalizing

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Packaged Goods Control

Packaged Goods Control

Pre-packaged Goods Control mode enables to collect weighings from RADWAG-designed weighing instruments, carry out control and generate PGC reports. Different types of weighing instruments can be combined into a network. The control can be started on a balance or via computer software. It is automatically finished after a respective quantity of packages is verified.
Collected data allows you to assess quality of produced pre-packaged goods and their conformity with:
- internal quality control system;
- 'Pre-Packaged Goods' regulation of 7th May 2009 (Journal of Laws No 91, item 740), on the requirements concerning quantity inspection of pre-packaged goods control, which inspection is to be carried out by means of random selection of the measurements results and sending those results to pre-packaged goods control procedure.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Dokümantasyon
Data Sheet Data Sheet
Data Sheet

Bakış
Bakış
İndirme
İndirme

Choose more product:
Bakış Bakış İndirmeİndirme
User Manual - WPY Multifunctional Scale
User Manual - WPY Multifunctional Scale
Bakış
Bakış
İndirme
İndirme
(1.68 MB)
Software Manual - CBCP 03
Software Manual - CBCP 03
Bakış
Bakış
İndirme
İndirme
(0.23 MB)
Start up Guide
Start up Guide
Bakış
Bakış
İndirme
İndirme
(1.26 MB)
Quick start
Quick start
Bakış
Bakış
İndirme
İndirme
(2.47 MB)
Software Manual - Appendices 01
Software Manual - Appendices 01
Bakış
Bakış
İndirme
İndirme
(1.81 MB)
Software Manual - PUE 7.1
Software Manual - PUE 7.1
Bakış
Bakış
İndirme
İndirme
(6.55 MB)
Conformity Declarations
Conformity Declarations
Bakış
Bakış
İndirme
İndirme
(0.04 MB)
RTP Thermal Receipt Printer
RTP Thermal Receipt Printer
Bakış
Bakış
İndirme
İndirme
(1.64 MB)
THBR System 2.0
THBR System 2.0
Bakış
Bakış
İndirme
İndirme
(5.17 MB)
Stainless Steel in RADWAG products. Standard and special applications
Stainless Steel in RADWAG products. Standard and special applications
Bakış
Bakış
İndirme
İndirme
(2.23 MB)
PUE 7.1 Terminal
PUE 7.1 Terminal
Bakış
Bakış
İndirme
İndirme
(2.33 MB)
Aksesuarlar
R-LAB

Aksesuarlar

Newsletter

Subscribe to the newsletter if you would like to receive RADWAG news.

View more
Offer
Ürün
Yeni ürünler
Destek
Calibration
User manuals
İndirme
Service
Uzaktan yardım
Kataloglar
Yayınlar
Blog
Service evaluation survey
Fill out the RMA service request
Webinars
Radwag
Firma
ISO Kalite Sistemi
Ürün sertifikaları
Prizes and Awards
Fuarlar ve Konferanslar
İletişim
Gizlilik Politikası
Radwag Terazileri İleri Tartım Teknolojileri
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 63 03
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2024 RADWAG Balances and Scales. All rights reserved.

Bir dil seçin

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on Deutsch Deutsch
Change language page on English English
Change language page on Español Español
Change language page on Français Français
Change language page on Italiano Italiano
Change language page on Polski Polski
Česky
Português (Brasil)
Change website to USA USA
Change language page on 中文 中文
Presentations Presentations Presentations
Subscribe Subscribe Subscribe
Radwag in Facebook Radwag in Facebook Facebook
Radwag in YouTube Radwag in YouTube Youtube
Radwag in Vimeo Radwag in Vimeo Vimeo
Radwag in LinkedIn Radwag in LinkedIn LinkedIn
Webinars Radwag Webinars Radwag Webinars
close
e-posta:
Firma ismi:
İsminiz:
I consent to the processing of my personal data for marketing purposes by Radwag Wagi Elektroniczne Witold Lewandowski.
I consent to receive marketing and product-related messages by electronic means from Radwag Wagi Elektroniczne Witold Lewandowski.
I have read the Privacy Policy of RADWAG Wagi Elektroniczne Witold Lewandowski.
lock_openI want to access the files
close
Slide to go back ↩