600kg d:200 g H315.4P2.600.H Paslanmaz Çelik Kiriş Terazi – Radwag Terazileri İleri Tartım Teknolojileri

Genel Açıklama

H315/4P2 serisi kiriş terazileri, kararlı, denenmiş 4 yük hücreli tartım çözümleri ile standart palet terazilerinden çok daha yönlü uygulamalar sunmaktadır. 5 metre uzaklığa kadar ayarlanabilen kirişler arası mesafe, H315/4P2/H terazilerin farklı yüklere (kutular, uzun çubuklar, ağır bölümler) uygunluğunu sağlar. Tartılacak yük standart fork-lift ile kirişler üzerine yerleştirilebilir. H315/4P2/H serisi kiriş teraziler paslanmaz çelikten imal edilir. Opsiyonel olarak bir terazideki kiriş sayısı 4’e kadar arttırılabilir. Kullanılacağı yere kolayca taşınabilmesi için kiriş terazilerin tutamaçları vardır. Terazi, standart olarak, arkadan aydınlatmalı LCD göstergesi ve fonksiyon düğmeleri olan paslanmaz çelik kutulu PUE H315 serisi indikatör ile sunulur. İndikatörün uzun bir kablosu vardır. Terazi şebekeden beslenir ve RS232 ara birimi standart olarak verilir. Kantarın, ilave ücret karşılığı çift kademeli versiyonu mevcuttur.

Teknik Veriler

Maksimum yük [Max]	600 kg
Minimum yük [Min]	4 kg
Okuma içinğruluğu [d]	200 g
Dara aralığı	-600 kg
OIML sınıfı	III
Display	4,3” LCD (aydınlatma ile)
Kablo uzunluğu	3 m + 5 m
Tartım kefesi boyutları	2 adet 1,2 m
Cihaz boyutları G x D x Y	1200×120×85 mm
Ambalaj boyutları G x D x Y	1400×400×550 mm
Göstergeli terazi kütlesi	40 kg
IP Sınıfı	IP 66 / 69 konstrüksiyon, IP 66 / 67 / 69 terminal
Haberleşme arayüzü	RS232, USB
Opsiyonel arayüzler	RS232 veya RS485 veya 4IN/4OUT veya Ethernet veya analog çıkış 4-20 mA
Güç kaynağı	100 – 240 V AC 50/60 Hz
Opsiyonel güç kaynağı	dahili batarya
Batarya ile çalışma süresi	max 7h
Çalıştırma sıcaklığı	-10 – +40 °C
Atmosferik nem	10% – 85% RH yoğunlaşma yok

Additional fee
for verification

Fonksiyonlar

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Internal battery

Internal and rechargeable battery of SLA 6 V type (sealed lead acid) enables device operation without connecting the device to the mains (9h operation). The weighing instrument controls battery status and displays a respective pictogram on the screen.

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Dokümantasyon

Data Sheet

Bakış

İndirme

Choose more product:
Bakış

Bakış

İndirme

Aksesuarlar

PT0019.5 Kablo

PT0232.2 Kablo

PT0019.2 Kablo

P0261 Kablo

PT0019.10 Kablo