H315.2K.300/600 Asma ray kantarı

✆

Deutsch English Español Français Italiano Polski Türkiye Česky USA

Ana Sayfa > Ürün > Otomatik terazileri > Asma ray kantalari > H315.2K.300/600 Asma ray kantarı

This image is for reference only.

H315.2K.300/600 Asma ray kantarı

Ürün kodu: WP-238-1001

Modeli değiştirin (2)

done

Max: 300 / 600kgd: 0,1 / 0,2kg

expand_more

H315.2K.300/600H Asma ray kantarı

Max: 300 / 600kgd: 0,1 / 0,2kg

Maksimum yük [Max]: 300 / 600 kg
Okuma doğruluğu [d]: 0,1 / 0,2 kg

Modeli değiştirin:

✓ H315.2K.300/600 Asma ray kantarı

✓ H315.2K.300/600H Asma ray kantarı

Select all

Bakış

İndirme

Request a quote

Karşılaştırmak için ürün ekleyin Advanced Search

Genel Açıklama

H315 serisi asma ray kantarı, yarım karkasın asma rayda taşınırken tartılması için tasarlanmıştır. Tartım süreci, tekerlekli taşıyıcının ölçülecek ağırlıkla beraber asma rayın ölçme bölgesine girmesiyle başlar. Yük hücreleri tartım rayının üstüne uzunlamasına, küresel mandrel ile monte edilmiştir. Bu tasarım, konstrüksiyon üzerindeki gerilimi elimine eder. Kantar karkas sınıflandırma cihazı ile birlikte çalışabilir. H315 serisi, galvanizden veya paslanmaz çelikten, çift kademe tartım cihazı olarak imal edilir. Paslanmaz çelik, kablolu, arkadan aydınlatmalı LCD’li PUE H315 indikatörü ile donatılmışlardır.

Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications

Teknik Veriler

Maksimum yük [Max]	300 / 600 kg
Minimum yük [Min]	2 kg
Okuma içinğruluğu [d]	0,1 / 0,2 kg
Dara aralığı	-600 kg
OIML sınıfı	III
Display	LCD (aydınlatma ile)
Algılama hattı genişliği	L= 800 mm (min. 200 mm)
IP Sınıfı	IP 67 konstrüksiyon, IP 68 (1h max)/69 terminal
Konstrüksiyon	galvanizli
Haberleşme arayüzü	RS232, USB
Opsiyonel arayüzler	RS232 veya RS485 veya 4IN/4OUT veya Ethernet veya analog çıkış 4-20 mA
Güç kaynağı	100 – 240 V AC 50/60 Hz
Opsiyonel güç kaynağı	dahili batarya
Batarya ile çalışma süresi	max 7h
Çalıştırma sıcaklığı	-10 – +40 °C
Atmosferik nem	10% – 85% RH yoğunlaşma yok

Extra payment
for verification

Fonksiyonlar

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Internal battery

Internal and rechargeable battery of SLA 6 V type (sealed lead acid) enables device operation without connecting the device to the mains (9h operation). The weighing instrument controls battery status and displays a respective pictogram on the screen.

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Dokümantasyon

Data Sheet

Bakış

İndirme

Choose more product:
Bakış

Bakış

İndirme

User Manual - CBCP 01

Bakış

İndirme

(0.30 MB)

User Manual - PUE H315

Bakış