Balance de précision C32.10.PM

Balances RADWAG PM

Précision de laboratoire dans des conditions industrielles.

Technologie améliorée

Possibilité de peser des charges jusqu’à 120 kg sur un grand plateau avec une grande précision et une bonne répétabilité
erreur d’excentricité minimale dans toute la gamme,
mesure rapide et stable (réalisable en 1 seconde),
stabilité des paramètres dans le temps et dans le transport,
dimensions du plateau de pesée ajustées à la précision de la balance

sont les caractéristiques des balances RADWAG PM. Tout cela est le résultat de l’application d’un système de mesure innovant basé sur la technologie améliorée MONO
BLOCK^® .

Le changement de la structure monobloc a permis de travailler avec une précision de 0,01 g avec une capacité de charge de 20 kg et 0,2 g avec une capacité de charge de 120 kg, une répétabilité à partir de 0,01 g et une résistance aux changements de conditions environnementales.

Les balances PM comprennent également:

construction solide basée sur un monobloc plus grand et plus haut,
système intégré de protection contre les surcharges à 4 points,
étalonnage interne,
Écran couleur 5",
mise en service facile, utilisation intuitive et ergonomie de travail,

Application

Les balances PM garantissent non seulement une lecture précise et une mesure rapide, mais sont également universelles et peuvent donc être utilisées dans de nombreux secteurs industriels.

Le dosage, la formulation et le comptage de pièces ne sont que quelques-unes des applications possibles de ces dispositifs polyvalents.

Les balances PM trouveront des destinataires partout où des disositifs de pesage avec une grande précision et une grande capacité de charge sont nécessaires.

Pesée sous la balance

Les balances achetées après le 15 février 2023 permettront le pesage sous la balance à tout moment après l'achat du dispositif. Achetez simplement un crochet dédié.

* RFID ISO/IEC 14443 Type A, 13,56 MHz

Acier inoxydable in RADWAG products
Learn about the use and maintenance of stainless steel products:
Acier inoxydable dans les balances RADWAG

Paramètres Techniques

Capacité maximale [Max]	10 kg
Capacité minimale [Min]	0,5 g
Capacité préliminaire	1 kg
Précision de lecture	0,01 g
Échelon de légalisation [e]	0,1 g
Étendue de tare	-10 kg
Pesée minimale USP	8,2 g
Pesée minimale (U=1%, k=2)	0,82 g
Répétabilité (Max)	0,01 g
Répétabilité (5% Max)	0,004 g
Linéarité	±0,025 g
Temps de stabilisation	1 s
Ajustage	interne (automatique)
Classe de précision OIML	II
Système de nivellement	manuel
Afficheur	5” graphique couleurs
Dimension du plateau	200×185 mm
Dimensions de colis	520×520×280 mm
Masse nette	10 kg
Masse brute	13,5 kg
Degré de protection	IP 43
Interface de Communication	2×RS232, USB-A, USB-B, Ethernet, 4 IN / 4 OUT (numériques), Wi-Fi^®
Alimentation	Adapter: 100 – 240V AC 50/60Hz 0,6A; 12V DC 1,2A Balance: 10 – 12V DC 1A max
Température du travail	+10 – +40 °C

Extra payment
for verification

Répétabilité exprimée comme un écart standardisé de 10 placements de chargé.
Temps de stabilisation dépend de conditions externes et de la dynamique du placement d’un poids sur le plateau; déterminé pour le profil FAST.
Précharge – une valeur égale à ±10 % de la capacité maximale [Max] de la balance homologuée. Il est possible de démarrer la balance avec la masse de précharge maximale posée sur le plateau.

360°

Films

Impression facile avec Wi-Fi^® Thermal Receipt Printer – imprimante de reçus thermique de Radwag

Solution complète pour la mesure de la masse en pharma

Fonctions

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.

Under-pan weighing

The solution enables weighing with use of a stand, which is advisable for loads of non-standard shapes and dimensions and those that generate magnetic field.

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of under-pan weighing. Tested load of significant size may be measured this way.

Replaceable unit

Replaceable units.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

Documentation

Cartes de produits

Data Sheet

Voir

Download

Choose more product:
Voir

Voir

Download

Modes d'emploi

Start up Guide

Voir

Download

(1.69 MB)