Balanza multifuncional HY10.6/15.H2.CCE

✆
Radwag Balanzas Electrónicas
NovedadesNovedades VídeosVídeos CatálogosCatálogos
Selected language Español
Pagina principal > Productos > Soluciones farmacológicas > Básculas de control CCE > Balanzas para control estática > Balanza multifuncional HY10.6/15.H2.CCE
Balanza multifuncional HY10.6/15.H2.CCE
This image is for reference only.

Balanza multifuncional HY10.6/15.H2.CCE

Código de producto: WK-311-1007
Change the model (7)
done
Balanza multifuncional HY10.6/15.H2.CCE
Max: 6 / 15kgd: 2 / 5g

⤢

 250×300mm
expand_more
Balanza multifuncional HY10.1,5/3.H1.CCE
Max: 1,5 / 3kgd: 0,5 / 1g

⤢

 150×200mm
Balanza multifuncional HY10.3/6.H1.CCE
Max: 3 / 6kgd: 1 / 2g

⤢

 150×200mm
Balanza multifuncional HY10.3/6.H2.CCE
Max: 3 / 6kgd: 1 / 2g

⤢

 250×300mm
Balanza multifuncional HY10.6/15.H3.CCE
Max: 6 / 15kgd: 2 / 5g

⤢

 410×410mm
Balanza multifuncional HY10.15/30.H3.CCE
Max: 15 / 30kgd: 5 / 10g

⤢

 410×410mm
Balanza multifuncional HY10.30/60.H3.CCE
Max: 30 / 60kgd: 10 / 20g

⤢

 410×410mm
Maxima capacidad [Max]: 6 / 15 kg
Legibilidad [d]: 2 / 5 g

close
Change the model:
✓ Balanza multifuncional HY10.1,5/3.H1.CCE
✓ Balanza multifuncional HY10.3/6.H1.CCE
✓ Balanza multifuncional HY10.3/6.H2.CCE
✓ Balanza multifuncional HY10.6/15.H2.CCE
✓ Balanza multifuncional HY10.6/15.H3.CCE
✓ Balanza multifuncional HY10.15/30.H3.CCE
✓ Balanza multifuncional HY10.30/60.H3.CCE
Select all
Ver
Guardar
Quiero saber más
Para comparar Búsqueda avanzada
Descripción

Balanza HY10.H para control estática

 
La balanza HY10.H.CCE tiene un módulo implementado que controla los productos envasados, basado en una base de datos que contiene una lista de productos y usuarios. El control iniciado desde la balanza se termina automáticamente después de verificar el número apropiado de paquetes (muestra), que está determinado por el programa de balanza dependiendo del número de lotes de bienes. La balanza tiene una pantalla gráfica (panel táctil de 10.1 '') en la que se muestra información sobre la control actual y sus resultados.
 
 

Proceso de control:

  • selección del usuario
  • selección de surtido
  • control de inicio,
  • descarga de pesajes,
  • finalización automática del control después de pesar un cierto número de paquetes
  • impresión de informe de control
Cada control realizado se completa con un informe final que contiene toda la información necesaria para el informe sobre productos envasados. El informe se guarda automáticamente en la memoria interna de la balanza y también se puede imprimir en una impresora conectada a la balanza.
 
 
El objetivo de la balanza es controlar los productos envasados ​​(CCE), por lo que recuerda que es necesaria la legalización. Recomendamos pedir una balanza con la verificación adecuada.
 
 
Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications
Datos tecnicos
Maxima capacidad [Max]

6 / 15

 kg

Minima capacidad

40 / 100

 g

Legibilidad [d]

2 / 5

 g

División de legalización [e]

2 / 5

 g

Rango de tara

-15

 kg

Clase OIML

III

 

Pantalla

10,1″ gráfico color pantalla táctil

 

Longitud del cable

1,5

 m

Dimensión de platillo

250×300

 mm

Dimensiones de embalaje

350×560×500

 mm

Masa neta

10,54

 kg

Masa bruta

11,5

 kg

Grado de protección

IP 68 construcción, IP 68 (1h max)/69 medidor

 

Conectividad

2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digitales)

 

Interfaces opcionales

módulo Wi-Fi® 802.11 b/g/n, módulo Profibus (DP SLAVE), módulo RS485, módulo PROFINET (RJ45), modulo de salida analógica (4-20mA, 0-20mA, 0-10V) , 12IN / 12OUT (IN – 5-24 VDC, OUT – max 30 VDC, 0,5 ADC)

 

Alimentacion

100 – 240 V AC 50/60 Hz

 

Temperatura de trabajo

-10 – +40

 °C

Humedad relativa de aire

10% – 85% RH sin condensación

 

CE
2 año de garantía
Legalización de las balanzas automaticas
Control de los Productos envasados
Vídeos
Complete Solutions for Mass Measurement in Pharma Industry
HY10 Terminal de pesaje avanzado
RADWAG Remote Desktop
RADWAG Remote Desktop - Windows 10
Funciones
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Labelling

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).
Plus/Minus Control

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Totalizing

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Replaceable unit

Replaceable unit

Replaceable units.
Statistical Quality Control

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
Packaged Goods Control

Packaged Goods Control

Pre-packaged Goods Control mode enables to collect weighings from RADWAG-designed weighing instruments, carry out control and generate PGC reports. Different types of weighing instruments can be combined into a network. The control can be started on a balance or via computer software. It is automatically finished after a respective quantity of packages is verified.
Collected data allows you to assess quality of produced pre-packaged goods and their conformity with:
- internal quality control system;
- 'Pre-Packaged Goods' regulation of 7th May 2009 (Journal of Laws No 91, item 740), on the requirements concerning quantity inspection of pre-packaged goods control, which inspection is to be carried out by means of random selection of the measurements results and sending those results to pre-packaged goods control procedure.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Transactions

Transactions

Complex weighing mode for registration of weighings that are part of transactions such as sale, purchase and warehouse transfer. You can create a new transaction using the scale. It is possible to pause the transaction or abort it.  The function supports warehouse management in an enterprise.
Documentación
Tarjetas de productos
Data Sheet Data Sheet
Data Sheet

Ver
Ver
Guardar
Guardar

Choose more product:
Ver Ver GuardarGuardar
Manual de usuario
Manual de instrucciones - CBCP 03
Manual de instrucciones - CBCP 03
Ver
Ver
Guardar
Guardar
(0.35 MB)
Manual de instrucciones - PUE HY10
Manual de instrucciones - PUE HY10
Ver
Ver
Guardar
Guardar
(1.87 MB)
Start up Guide
Start up Guide
Ver
Ver
Guardar
Guardar
(1.38 MB)
Manual de instrucciones
Manual de instrucciones
Ver
Ver
Guardar
Guardar
(1.11 MB)
Manual de instrucciones - Balanzas multifuncionales HY10
Manual de instrucciones - Balanzas multifuncionales HY10
Ver
Ver
Guardar
Guardar
(1.51 MB)
Manual de instrucciones - Instrucciones de software PUE HY10
Manual de instrucciones - Instrucciones de software PUE HY10
Ver
Ver
Guardar
Guardar
(2.95 MB)
Manual de instrucciones - Radwag-Mass -Node-RED
Manual de instrucciones - Radwag-Mass -Node-RED
Ver
Ver
Guardar
Guardar
(0.58 MB)
Manual de instrucciones - PROFIBUS communication protocol PUE HY10
Manual de instrucciones - PROFIBUS communication protocol PUE HY10
Ver
Ver
Guardar
Guardar
(0.32 MB)
Quick start
Quick start
Ver
Ver
Guardar
Guardar
(2.47 MB)
Manual de instrucciones - APÉNDICES 01
Manual de instrucciones - APÉNDICES 01
Ver
Ver
Guardar
Guardar
(0.90 MB)
Manual de instrucciones - Conexión de otra plataforma en el terminal
Manual de instrucciones - Conexión de otra plataforma en el terminal
Ver
Ver
Guardar
Guardar
(0.70 MB)
Manual de instrucciones
Manual de instrucciones
Ver
Ver
Guardar
Guardar
(1.06 MB)
Declaraciones de conformidad
Conformity Declaration
Conformity Declaration
Ver
Ver
Guardar
Guardar
(0.04 MB)
Publicaciones y folletos
Sistema THBR 2.0
Sistema THBR 2.0
Ver
Ver
Guardar
Guardar
(5.24 MB)
Stainless Steel in RADWAG products. Standard and special applications
Stainless Steel in RADWAG products. Standard and special applications
Ver
Ver
Guardar
Guardar
(2.23 MB)
PUE HY10 Terminal
PUE HY10 Terminal
Ver
Ver
Guardar
Guardar
(0.22 MB)
Accesorios
R-LAB

Accesorios

Módulos adicionales

Audit Trail3
Procesos de identificación (Workflow)3
Módulo de acceso RDA (RADWAG Data Access)3
RES Protocolo de comunicación Radwag3

Oferta
Productos
Novedades
Soporte
Calibration
User manuals
Descargar archivos
Servicios
Acceso remoto
Catálogos
Publicaciones
Blog
Registro del producto.
Complete la solicitud de servicio de RMA
Webinars
Radwag
Sobre la empresa
Sistema de calidad ISO
Certificados
Premios y Distinciones
Ferias y Conferencias
Contacto
Privacy policy
RADWAG Balanzas Electrónicas
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 60 00
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2024 RADWAG Balances and Scales. All rights reserved.

Selecionar idioma

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on Deutsch Deutsch
Change language page on English English
Change language page on Français Français
Change language page on Italiano Italiano
Change language page on Polski Polski
Change language page on Türkiye Türkiye
Česky
Português (Brasil)
Change website to USA USA
Change language page on 中文 中文
Presentations Presentations Presentations
Subscribe Subscribe Subscribe
Radwag in Facebook Radwag in Facebook Facebook
Radwag in YouTube Radwag in YouTube Youtube
Radwag in Vimeo Radwag in Vimeo Vimeo
Radwag in LinkedIn Radwag in LinkedIn LinkedIn
Webinars Radwag Webinars Radwag Webinars
close
E-mail:
Nombre de empresa
Nombre:
I consent to the processing of my personal data for marketing purposes by Radwag Wagi Elektroniczne Witold Lewandowski.
I consent to receive marketing and product-related messages by electronic means from Radwag Wagi Elektroniczne Witold Lewandowski.
I have read the Privacy Policy of RADWAG Wagi Elektroniczne Witold Lewandowski.
lock_openI want to access the files
close
Slide to go back ↩