5Y.25.PM Hassas Teraziler

✆
Radwag Terazileri İleri Tartım Teknolojileri
Yeni ürünlerYeni ürünler
Selected language Türkiye
Ana Sayfa > Ürün > Laboratuvar terazileri > Hassas Teraziler > 5Y Serisi > 5Y.25.PM Hassas Teraziler
360° product view – click to rotate
Obraz
This image is for reference only.

5Y.25.PM Hassas Teraziler

Ürün kodu: WL-224-0004
Modeli değiştirin (8)
done
5Y.25.PM Hassas Teraziler
Max: 25kgd: 0,1g

⤢

 350×260mm
expand_more
5Y.10.PM Hassas Teraziler
Max: 10kgd: 0,01g

⤢

 200×185mm
5Y.15.PM Hassas Teraziler
Max: 15kgd: 0,01g

⤢

 200×185mm
5Y.20.PM Hassas Teraziler
Max: 20kgd: 0,01g

⤢

 200×185mm
5Y.35.PM Hassas Teraziler
Max: 35kgd: 0,1g

⤢

 350×260mm
5Y.50.PM Hassas Teraziler
Max: 50kgd: 0,1g

⤢

 350×260mm
5Y.60.PM Hassas Teraziler
Max: 60kgd: 0,1g

⤢

 400×500mm
5Y.120.PM Hassas Teraziler
Max: 120kgd: 0,2g

⤢

 400×500mm
Maksimum yük [Max]: 25 kg
Okuma doğruluğu [d]: 0,1 g

close
Modelleri seç:
✓ 5Y.10.PM Hassas Teraziler
✓ 5Y.15.PM Hassas Teraziler
✓ 5Y.20.PM Hassas Teraziler
✓ 5Y.25.PM Hassas Teraziler
✓ 5Y.35.PM Hassas Teraziler
✓ 5Y.50.PM Hassas Teraziler
✓ 5Y.60.PM Hassas Teraziler
✓ 5Y.120.PM Hassas Teraziler
✓ Select all
Bakış
İndirme
Request a quote
Genel Açıklama

5Y.25.PM Hassas Teraziler

 
endüstriyel koşullarda laboratuvar hassasiyeti
 
 
 
  • Büyük bir kefede 120 kg'a kadar yükleri yüksek doğruluk ve iyi tekrarlanabilirlik ile tartabilme,
  • tüm aralıkta minimum eksantriklik hatası, 
  • hızlı ve kararlı ölçüm (1 saniye içinde elde edilebilir),
  • zaman içinde ve taşıma sırasında parametrelerin kararlılığı,
  • daha büyük ve daha yüksek bir monoblok temelli sağlam yapı,
  • Yerleşik 4 noktalı aşırı yük koruma sistemi,
  • kefenin boyutu terazinin doğruluğuna uyarlanmıştır,
  • dahi̇li̇ kali̇brasyon
RADWAG tarafından üretilen PM terazilerinin ayırt edici özellikleridir. Tüm bunlar, geliştirilmiş

MONO

BLOCK® teknolojisine dayalı yenilikçi bir ölçüm sisteminin kullanılmasının sonucudur. Tasarım değişikliği, 20 kg yük kapasitesinde 0,01 g ve 120 kg yük kapasitesinde 0,2 g hassasiyetle çalışmayı, 0,01 g'den itibaren tekrarlanabilirliği ve çevre koşullarındaki değişikliklere karşı direnci mümkün kılmıştır.
 
 
 

5Y.PM terazileri ayrıca şunları içerir:

  • 10 inç dokunmatik ekran,
  • kolay başlatma ve sezgisel kullanım ve ergonomi,
  • 21 CFR Bölüm 11 uyumluluğu,
  • Dijital Tartım Denetçisi (DWA),
  • çok aşamalı kullanıcı doğrulaması,
  • Ortam Işığı uyarıları,
  • Hotspot,
  • RFID,
  • Canlı Not metin notları,
  • Handy Library içindeki kullanışlı ölçüm geçmişi,
  • Widget'lar.
 
 
 

Uygulama

5Y.PM terazileri öncekilerden daha hassas, daha hızlı ve daha çok yönlüdür ve bu nedenle çeşitli sektörleri temsil eden şirketlerde kullanılan ekipman gereksinimlerini karşılar. Dozajlama, formülasyon ve parça sayımı bu cihazların olası uygulamalarından sadece birkaçıdır. PM terazileri, etkileyici doğrulukları ve yüksek yük kapasitelerinin kullanılacağı her yerde değerlerini kanıtlayacaktır.
 
 
 

21 CFR Bölüm 11

İlaç sektöründe mi çalışıyorsunuz? Dijital imzaya mı ihtiyacınız var?

Bağımsız bir cihaz olarak 21 CFR Bölüm 11/ EU GMP Ek 11 gerekliliklerini karşılayan bir laboratuvar terazisi sunuyoruz.
 
– Tam veri güvenliği
– Elektronik imzalar
– Doğrulamalar
– Elektronik kayıtlar
– Denetim izleri
 
 

Modbus TCP/IP

endüstriyel otomasyondaki en popüler iletişim protokollerinden biridir. 5Y ve CY10 terazilerinde uygulanması, bu serideki cihazları otomasyon entegratörleri için kullanıcı dostu hale getirir. 
 
Bir Modbus sisteminde terazi bir slave'dir ve genellikle bir PLC olan master tarafından tanımlanan görevleri yerine getirir. 5Y ve C10 terazilerindeki Modbus TCP/IP protokolü, diğer işlevlerin yanı sıra ağırlık okuma işlevlerinin, sıfırlama ve dara ağırlığının, dara ayarlarının ve MIN ve MAX eşiklerinin gerçekleştirilmesini sağlar.
 
 
 
Düşük tartım
İsteğe bağlı olarak (ek bir ücret karşılığında) teraziler, tartım platformunun dışındaki yükleri tartma seçeneğine sahiptir (alttan tartma veya terazinin altına yük asma olarak adlandırılır). Bu, standart olmayan boyutlara ve şekillere sahip yükler ve manyetik alan oluşturanlar için bir alternatiftir.
 
THBR 2.0 Sistemi
Çevresel koşulların izlenmesi için THBR 2.0 sistemi ile işbirliği.
 
RFID ISO/IEC 14443 Tip A, 13,56 MHz
 
 
Teknik Veriler
Maksimum yük [Max]

25

kg

Minimum yük [Min]

5

g

Ön yük

2,5

kg

Okuma içinğruluğu [d]

0,1

g

Yasallaştırma birimi [e]

1

g

Dara aralığı

-25

kg

Standart tekrarlanabilirlik [Maks. %5]

0,04

g

Standart tekrarlanabilirlik [Max]

0,1

g

Minimum ağırlık (USP)

82

g

Minimum ağırlık (U=1%,k=2)

8,2

g

Doğrusallık

±0,3

g

Kararlılık süresi

1

s

Ayarlama

dahili (otomatik)

OIML sınıfı

II

Tesviye sistemi

yarı otomatik – LevelSENSING

Display

10″ grafik renkli dokunmatik

Kiti bileşenleri

Hassas Teraziler, tartım kefesi, kumaş kapak, güç adaptörü.

Tartım kefesi boyutları

350×260

mm

Ambalaj boyutları G x D x Y

520×520×280

mm

Net ağırlık

12

kg

Brüt ağırlık

14,2

kg

IP Sınıfı

IP 43

Haberleşme arayüzü

2×USB-A, USB-C, RS 232 (COM3), HDMI, Ethernet, Wi-Fi®, Hotspot

Güç kaynağı

Adaptör: 100 – 240V AC 50/60Hz 1A; 15V DC 2,4A
Teraziler: 12 – 15V DC 1,6A max; 10–19W*

Çalıştırma sıcaklığı

+10 – +40

°C

CE
Doğrulama Additional fee
for verification

Tekrarlanabilirlik, kütle standardının 10 yerleştirmesinin standart sapması olarak ifade edilir.
Kararlılık süresi dış koşullara ve kefeye yük yerleştirme dinamiklerine bağlıdır; FAST profili için belirtilmiştir.
*Güç tüketimi terminal yapılandırmasına ve bağlı harici cihazların sayısına ve türüne bağlıdır.
Ön yük - yasal terazinin maksimum yükünün [Maks] ±%10'una eşit değer. Teraziyi, kefe üzerine yerleştirilen kütle maksimum ön yük değerine eşit olacak şekilde başlatmak mümkündür.
360°
Videolar
Complete Solutions for Mass Measurement in Pharma Industry
Connecting RADWAG RTP-UEW80 Printer via Wi-Fi® (Tutorial)
Talk to it. Voice Commands in New ELLIPSIS Balance by RADWAG
Remote VPN Support on ELLIPSIS Balances
ELLIPSIS – Unlimited Connections
310 ELLIPSIS – Scan or Tap to Log In
ELLIPSIS – New Balance by RADWAG
ELLIPSIS – Cutting Edge, Innovative, New
5Y Functions: Parts counting
PM 5Y Balances – Laboratory Precision Under Industrial Conditions
RTP - The First Receipt Printer of RADWAG Production!
Statistical Quality Control
Under-Pan Weighing in 5Y Balances. Peak Hold
What Interfaces do RADWAG Balances Have? Wi-Fi®, USB, Ethernet, HDMI and More!
Discover Hotspot in RADWAG Balances
Precision and Working Comfort – Operating RADWAG Balances in Every Glove!
5Y Functions: Animal Weighing
5Y Functions: Statistics
5Y Functions: DWA®
5Y Balance and Barcode Scanner – Easy Connection
5Y Functions: Checkweighing
5Y Functions: Dosing
5Y Functions: Formulations
Percentage deviations
5Y Functions: Weighing
5Y Functions: Proximity Sensors – Touch-Free Control (Tutorial)
5Y Functions: GLP Procedures – Objective Documentation of Measurements (Tutorial)
Weighing Printout Design in Analytical and Precision Balances (Tutorial)
Wi-Fi® özellikli RTP-UEW80 ile Kolay Baskı
New AS and PS 5Y Balances – Autotest (Tutorial)
Fonksiyonlar
Autotest

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g ± 5 g
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
Under-pan weighing

Under-pan weighing

The solution enables weighing with use of a stand, which is advisable for loads of non-standard shapes and dimensions and those that generate magnetic field.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Pipettes Calibration

Pipettes Calibration

Function verifying correctness of piston pipettes functioning, the verification is performed via gravimetric measurement of the excreted liquid. Pipettes calibration may be either a stand-alone module or it may be operated
Air density correction

Air density correction

Function performing correction of mass measurement indication, wherein the air density is taken into account. It is used in balances with reading unit < 0,01 mg.
Density determination

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of  under-pan weighing. Tested load of significant size may be measured this way.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Ambient conditions monitoring

Ambient conditions monitoring

The possibility of cooperation with the THBR 2.0 system
Statistical Quality Control

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
Packaged Goods Control

Packaged Goods Control

Pre-packaged Goods Control mode enables to collect weighings from RADWAG-designed weighing instruments, carry out control and generate PGC reports. Different types of weighing instruments can be combined into a network. The control can be started on a balance or via computer software. It is automatically finished after a respective quantity of packages is verified.
Collected data allows you to assess quality of produced pre-packaged goods and their conformity with:
- internal quality control system;
- 'Pre-Packaged Goods' regulation of 7th May 2009 (Journal of Laws No 91, item 740), on the requirements concerning quantity inspection of pre-packaged goods control, which inspection is to be carried out by means of random selection of the measurements results and sending those results to pre-packaged goods control procedure.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Wi-Fi®

Wi-Fi®

Thanks to wireless communication between the computer and a balance, it is possible to use a balance inside a laminar flow hood and a fume cupboard.

Dokümantasyon
Data Sheet Data Sheet
Data Sheet

Bakış
Bakış
İndirme
İndirme

Choose more product:
Bakış Bakış İndirmeİndirme
Aksesuarlar

Newsletter

Subscribe to the newsletter if you would like to receive RADWAG news.

View more
Offer
Ürün
Yeni ürünler
Destek
Calibration
User manuals
İndirme
Service
Uzaktan yardım
Kataloglar
Yayınlar
Blog
Service evaluation survey
Fill out the RMA service request
Webinars
Radwag
Firma
ISO Kalite Sistemi
Ürün sertifikaları
Prizes and Awards
Fuarlar ve Konferanslar
İletişim
Gizlilik Politikası
Radwag Terazileri İleri Tartım Teknolojileri
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 63 03
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2025 RADWAG Balances and Scales. All rights reserved.

Bir dil seçin

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on Português (Brasil) Português (Brasil)
Change language page on Deutsch Deutsch
Change language page on English English
Change language page on Español Español
Change language page on Français Français
Change language page on Italiano Italiano
Change language page on Japanese (日本語) Japanese (日本語)
Change language page on Polski Polski
Česky
Change website to USA USA
Change language page on 中文 中文
Presentations Presentations Presentations
Subscribe Subscribe Subscribe
Radwag in Facebook Radwag in Facebook Facebook
Radwag in YouTube Radwag in YouTube Youtube
Radwag in Vimeo Radwag in Vimeo Vimeo
Radwag in LinkedIn Radwag in LinkedIn LinkedIn
Webinars Radwag Webinars Radwag Webinars
40 Years Together 40 Years Together Years Together
Slide to go back ↩