WPY 3/6.F1.K.PGC はかり

✆
Selected language Japanese (日本語)
ホーム > 製品 > PGCはかり > Packaged Goods Control用はかり - 統計管理 > PGC用WPYスケール > WPY 3/6.F1.K.PGC はかり
This image is for reference only.

WPY 3/6.F1.K.PGC はかり

製品コード: WK-308-1049
モデルを変更する (13)
done
WPY 3/6.F1.K.PGC はかり
Max: 3 / 6kgd: 1 / 2g

⤢

 300×300mm
expand_more
WPY 0.6/1.5.D2.PGC はかり
Max: 0,6 / 1,5kgd: 0,2 / 0,5g

⤢

 195×195mm
WPY 1,5/3.D2.PGC はかり
Max: 1,5 / 3kgd: 0,5 / 1g

⤢

 195×195mm
WPY 3/6.D2.PGC はかり
Max: 3 / 6kgd: 1 / 2g

⤢

 195×195mm
WPY 3/6.F1.R.PGC はかり
Max: 3 / 6kgd: 1 / 2g

⤢

 300×300mm
WPY 6/15.F1.R.PGC はかり
Max: 6 / 15kgd: 2 / 5g

⤢

 300×300mm
WPY 6/15.F1.K.PGC はかり
Max: 6 / 15kgd: 2 / 5g

⤢

 300×300mm
WPY 15/30.F1.K.PGC はかり
Max: 15 / 30kgd: 5 / 10g

⤢

 300×300mm
WPY 15/30.F1.R.PGC Scale
Max: 15 / 30kgd: 5 / 10g

⤢

 300×300mm
WPY 15/30.C2.K.PGC はかり
Max: 15 / 30kgd: 5 / 10g

⤢

 400×500mm
WPY 15/30.C2.R.PGC はかり
Max: 15 / 30kgd: 5 / 10g

⤢

 400×500mm
WPY 30/60.C2.K.PGC はかり
Max: 30 / 60kgd: 10 / 20g

⤢

 400×500mm
WPY 30/60.C2.R.PGC はかり
Max: 30 / 60kgd: 10 / 20g

⤢

 400×500mm
最大ひょう量 [Max]: 3 / 6 kg
最小表示 [d]: 1 / 2 g

close
モデルを選択:
✓ WPY 0.6/1.5.D2.PGC はかり
✓ WPY 1,5/3.D2.PGC はかり
✓ WPY 3/6.D2.PGC はかり
✓ WPY 3/6.F1.K.PGC はかり
✓ WPY 3/6.F1.R.PGC はかり
✓ WPY 6/15.F1.R.PGC はかり
✓ WPY 6/15.F1.K.PGC はかり
✓ WPY 15/30.F1.K.PGC はかり
✓ WPY 15/30.F1.R.PGC Scale
✓ WPY 15/30.C2.K.PGC はかり
✓ WPY 15/30.C2.R.PGC はかり
✓ WPY 30/60.C2.K.PGC はかり
✓ WPY 30/60.C2.R.PGC はかり
✓ すべて選択
表示する
ダウンロード
さらに詳しく知りたい
概要

統計管理用はかり WPY

 
WPY/PGCは、包装製品の管理を実施するためのモジュールを備えています。このモジュールは、製品およびオペレーターのリストを含むデータベースによってサポートされています。はかりによって開始された管理は、あらかじめ設定された数量のパッケージ（サンプル）の検査が完了すると自動的に終了します。パッケージ数は、製品バッチのサイズに応じてスケールのプログラムによって決定されます。はかりには、5.7インチのカラフルなグラフィックタッチスクリーンディスプレイが搭載されており、現在実行中の管理とその結果に関する情報をプレビューできます。
 
 
 
 

管理サイクルは、次のスキームに従って実行されます:

  • オペレーターの選択
  • 製品の選択
  • 管理開始
  • 計量記録の取得
  • 一定数のパッケージ後に自動制御終了
  • 管理レポートの印刷
実施された各管理は、すべての必要情報を含む最終レポートで終了します。このレポートは、事前包装製品の管理レポートに必要な情報を含んでいます。レポートは自動的にスケールのメモリに保存され、同時にスケールに接続されたプリンターで印刷することも可能です。
 
 
 
 

はかりをコンピュータプログラムと連携することで以下が可能になります:

  • 連続した計量データをデータベースに保存 
  • コンピュータソフトウェアのレベルで制御プロセスの自動印刷
  • スケールからコンピュータソフトウェアへユーザー定義コードを送信（計量製品コード、オペレーターコード、バッチ数量、バッチ番号、制御開始/停止）
  • コンピュータプログラム上で製品コードとその説明（名称）を定義し、会社の業種に適した個別の製品名を割り当てることが可能
 
 
 
このスケールの目的は、包装製品の管理（PGC）です。そのため、検定（適法化）が必要です。
適切な検定（適法化）が行われたスケールを注文することを推奨します。
 
 
データシート
最大ひょう量 [Max]

3 / 6

kg

最小荷重

20 / 40

g

最小表示 [d]

1 / 2

g

風袋範囲

-6

kg

OIMLクラス

III

ディスプレイ

5インチグラフィックカラータッチスクリーン

ケーブル長

1

m

計量皿寸法

300×300

mm

梱包寸法 幅x奥行x高さ

570×390×170

mm

保護クラス

IP 65 ステンレススチール, IP 43 円筒形

通信インターフェース

2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (IN), Wi-Fi®

電源

100 – 240 V AC 50/60 Hz

動作温度

-10 – +40

°C

相対湿度

10% – 85% RH 温度における

CE
2年間保証
自動はかりの検定
Packaged Goods Control
ビデオ
Complete Solutions for Mass Measurement in Pharma Industry
機能
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Labelling

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).
Plus/Minus Control

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Totalizing

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g ± 5 g
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Packaged Goods Control

Packaged Goods Control

Pre-packaged Goods Control mode enables to collect weighings from RADWAG-designed weighing instruments, carry out control and generate PGC reports. Different types of weighing instruments can be combined into a network. The control can be started on a balance or via computer software. It is automatically finished after a respective quantity of packages is verified.
Collected data allows you to assess quality of produced pre-packaged goods and their conformity with:
- internal quality control system;
- 'Pre-Packaged Goods' regulation of 7th May 2009 (Journal of Laws No 91, item 740), on the requirements concerning quantity inspection of pre-packaged goods control, which inspection is to be carried out by means of random selection of the measurements results and sending those results to pre-packaged goods control procedure.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
ドキュメント
データシート
Data Sheet Data Sheet
Data Sheet

表示する
表示する
ダウンロード
ダウンロード

Choose more product:
表示する 表示する ダウンロードダウンロード
アクセサリ
R-LAB

アクセサリ

RAD-KEY

アクセサリ

Newsletter

Subscribe to the newsletter if you would like to receive RADWAG news.

View more
オファー
製品
新製品
カスタマーサポート
校正
ユーザーマニュアル
ダウンロード
サービス
リモートアシスタンス
カタログ
文書関連
Blog
製品登録
RMA サービスリクエストを記入してください。
Webinars
Radwag
会社名
ISO品質システム
製品証明書
賞と表彰
イベントと会議
お問合せ
プライバシーポリシー
Radwag Balances and Scales
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 60 00
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2025 RADWAG Balances and Scales 無断複写・転載を禁じます。

言語を選択

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on Português (Brasil) Português (Brasil)
Change language page on Deutsch Deutsch
Change language page on English English
Change language page on Español Español
Change language page on Français Français
Change language page on Italiano Italiano
Change language page on Polski Polski
Change language page on Türkiye Türkiye
Česky
Change website to USA USA
Change language page on 中文 中文
Presentations Presentations Presentations
Subscribe Subscribe Subscribe
Radwag in Facebook Radwag in Facebook Facebook
Radwag in YouTube Radwag in YouTube Youtube
Radwag in Vimeo Radwag in Vimeo Vimeo
Radwag in LinkedIn Radwag in LinkedIn LinkedIn
Webinars Radwag Webinars Radwag Webinars
40 Years Together 40 Years Together Years Together
Slide to go back ↩