PUE 7.1 計量ターミナル

✆
Selected language Japanese (日本語)
ホーム > 製品 > 産業用はかり > 計量ターミナル > PUE 7.1 計量ターミナル > PUE 7.1 計量ターミナル
This image is for reference only.

PUE 7.1 計量ターミナル

製品コード: WX-008-0025
モデルを変更する (2)
done
PUE 7.1 計量ターミナル
expand_more
close
モデルを選択:
✓ PUE 7.1P（パネル型）計量ターミナル
✓ PUE 7.1 計量ターミナル
✓ すべて選択
表示する
ダウンロード
さらに詳しく知りたい
概要

PUE 7.1 計量ターミナル

 
PUE 7.1 ターミナルは、工業用ロードセルはかりの構成部品です。
 
 

エルゴノミクスと操作の快適性

PUE 7.1 ターミナルは、5.7インチTFTディスプレイ（タッチパネル付き）とメンブレンキーパッドを備えています。

このデバイスには、メニューから設定可能な2つの近接センサーが搭載されています。また、最大2つの計量プラットフォーム、バーコードスキャナー、プリンター、ラベラー、RFIDリーダー、およびPC機器（マウス、キーボード、USBフラッシュドライブ）と接続可能です。標準の PUE 7.1 端末 は1つの計量プラットフォームと通信し、拡張通信インターフェースを搭載しています： 2×USB, 2×RS 232, Ethernet, 4inputs/4outputs (デジタル), Wi-Fi®.
 
追加のプラットフォームモジュール（DP-6） をインストールすることで、1つの追加プラットフォームを接続することが可能です。
 
 
 
注意: 2つの計量プラットフォームに対応するターミナルの場合、ケーブル接続バージョンのみ利用可能です（/Rバージョンは存在しません）。
 
 
 
 

Wi-Fi® は Wi-Fi Alliance® の登録商標です。
データシート
OIMLクラス

III

検定ユニットの最大数量

6000 e

検定ユニットあたりの最小電圧

0,4 µV

検定ユニットあたりの最大電圧

3,25 µV

最小ロードセルインピーダンス

50 Ω

最大ロードセルインピーダンス

1200 Ω

ロードセル励起電圧

5V DC

信号の最大増加量

19,5 mV

ディスプレイ

5インチグラフィックカラータッチスクリーン

デバイスの寸法 幅x奥行x高さ

206×140×71

mm

梱包寸法 幅x奥行x高さ

300×250×130

mm

正味重量

0,6

kg

総重量

1,2

kg

保護クラス

IP 43

キーパッド

タッチスクリーン

ハウジング

自動

データベース容量

16 GB (micro SD)

オペレーティング·システム

Linux

プロセッサ

quad-core 64-bit Cortex-A53 1,2 GHz

メモリ

RAM 1GB LPDDR2

データメモリ

16 GB (micro SD)

通信インターフェース

2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (IN), Wi-Fi®

追加DP6 A/Cコンバータモジュール

1 出力

消費電力 max.

max. 1 A

動作温度

-10 – +40

°C

相対湿度

10% – 85% RH 温度における

ボタンの数

8

プラットフォームの最大数

2

CE
ビデオ
Complete Solutions for Mass Measurement in Pharma Industry
機能
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Labelling

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).
Plus/Minus Control

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Totalizing

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g ± 5 g
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
ドキュメント
データシート
Data Sheet Data Sheet
Data Sheet

表示する
表示する
ダウンロード
ダウンロード

Choose more product:
表示する 表示する ダウンロードダウンロード
アクセサリ
軟鋼製粉体塗装計量プラットフォーム
防水ステンレススチールプラットフォーム
ステンレス製HRP.Hプラットフォーム
R-LAB

アクセサリ

RAD-KEY

アクセサリ

Newsletter

Subscribe to the newsletter if you would like to receive RADWAG news.

View more
オファー
製品
新製品
カスタマーサポート
校正
ユーザーマニュアル
ダウンロード
サービス
リモートアシスタンス
カタログ
文書関連
Blog
製品登録
RMA サービスリクエストを記入してください。
Webinars
Radwag
会社名
ISO品質システム
製品証明書
賞と表彰
イベントと会議
お問合せ
プライバシーポリシー
Radwag Balances and Scales
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 60 00
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2025 RADWAG Balances and Scales 無断複写・転載を禁じます。

言語を選択

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on Português (Brasil) Português (Brasil)
Change language page on Deutsch Deutsch
Change language page on English English
Change language page on Español Español
Change language page on Français Français
Change language page on Italiano Italiano
Change language page on Polski Polski
Change language page on Türkiye Türkiye
Česky
Change website to USA USA
Change language page on 中文 中文
Presentations Presentations Presentations
Subscribe Subscribe Subscribe
Radwag in Facebook Radwag in Facebook Facebook
Radwag in YouTube Radwag in YouTube Youtube
Radwag in Vimeo Radwag in Vimeo Vimeo
Radwag in LinkedIn Radwag in LinkedIn LinkedIn
Webinars Radwag Webinars Radwag Webinars
40 Years Together 40 Years Together Years Together
Slide to go back ↩