210g 0,001g PS 210.R2.H 上皿天秤

PS 210.R2.H 上皿天秤

PS R2.Hシリーズの天秤は、上皿天秤の新たな基準を再定義します。

Rシリーズの全機能を備えるだけでなく、IP54規格に対応し、粉じんの付着やさまざまな角度からの水滴の影響を受ける環境でも確実に動作します。

LCD ディスプレイ

革新的なLCDディスプレイを搭載し、計測結果を鮮明かつ見やすく表示します。

さらに、新しいテキストラインにより、製品名や風袋値などの追加情報やメッセージを提供します。

インターフェース

PS R2.Hシリーズの特長のひとつが、天びん本体と分離された密閉構造のインターフェースユニットです。

インターフェースには、2×RS 232、USB Type A、USB Type Bを標準搭載し、オプションでワイヤレス接続にも対応しています。

本体は耐久性の高いプラスチック製、計量皿はステンレス製で、優れた耐久性と実用性を兼ね備えています。

吊下計量（Under-pan weighing）

2023年2月15日以降に購入した計量機器は、購入後いつでもアンダーパン計量が可能です。専用フックをご購入するだけで、簡単にこの機能を利用できます。

THBR 2.0 システム

THBR 2.0システムと連携し、周囲環境のモニタリングが可能です。

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of under-pan weighing. Tested load of significant size may be measured this way.

最大ひょう量 [Max]	210 g
最小荷重	20 mg
最小表示 [d]	0,001 g
風袋範囲	-210 g
繰返し性 (Max)	0,001 g
繰返し性 (5% Max)	0,0005 g
直線性	±0,002 g
安定化時間	2 s
調整	着脱式アダプター (着脱式アダプター)
レベリングシステム	自動センタリング
ディスプレイ	LCD (構造)
計量皿寸法	ø100 mm
梱包寸法	475×380×345 mm
正味重量	4,2 kg
総重量	6,2 kg
保護クラス	IP 54
通信インターフェース	2×RS232¹, USB-A, USB-B, Wi-Fi^® デジタル
電源	Adapter: 100 – 240V AC 50/60Hz 0,6A; 12V DC 1,2A : 12 – 15V DC 0,4A max
消費電力	4 W
動作温度	+10 – +40 °C
相対湿度	40% – 80%

PS 210.R2.H 上皿天秤

PS 210.R2.H 上皿天秤

LCD ディスプレイ

インターフェース

Autotest

Dosing

Percent Weighing

Totalizing

Parts counting

Peak hold

Statistics

Checkweighing

Under-pan weighing

GLP Procedures

Animal weighing

Density determination

アクセサリ

アクセサリ

アクセサリ

アクセサリ

アクセサリ

アクセサリ

アクセサリ

アクセサリ

アクセサリ

アクセサリ

アクセサリ

アクセサリ

アクセサリ

アクセサリ

アクセサリ

アクセサリ

Newsletter

言語を選択