6,1g 0,0000001g RMCM 5.5Y Robotic Mass Comparator

RMCM 5.5Y Robotic Mass Comparator

The RMCM Robotic Mass Comparator is a compact device that houses the functionality of a mass comparator and a robotic transport system. You will read further about the advantages of this combination.

Mass comparator and robotic transport system in one

The fusion of the mass comparator with the robotic transport system has resulted in:

Reduction of air drafts and vibrations from a robotic system in the course of comparison
Minimised risk of human error
Easier maintaining of stable ambient conditions inside the weighing chamber (thanks to a compact device dimensions).

Fully automatic standard dissemination

A shorter comparison process and less wear and tear on the transport robot are the effects of using an intermediate mass standard magazine. However, the greatest benefit of its use in the RMCM mass comparator is the possibility of a complete dissemination process.

Ambient conditions measured in real time

The RMCM mass comparator comes with high-performance thermos-hygro-barometers that allow real-time ambient conditions to be studied at three locations. The device features very high measurement readability: pressure at 0.001 hPa, humidity at 0.01% and temperature at 0.001°C. The reliability of the measurements of ambient conditions made using these sensors is confirmed by a calibration certificate.

Universal magazine insert shape

The mass standard magazine has 120 positions. The RMCM mass comparator compares weights in all shapes conforming to the OIML recommendation using just one universal insert.

Optional equipment

As optional equipment, we offer you:

Camera that allows you to view the comparison process remotely in real time provided you have internet access
RMCS software, which gives you full control of the comparative process.

データシート

E0 校正範囲	0.05 mg – 5 g *
E1 校正範囲	0.05 mg – 5 g
E2 校正範囲	0.05 mg – 5 g
F1 校正範囲	0.05 mg – 5 g
F2 校正範囲	0.05 mg – 5 g
最大ひょう量 [Max]	6,1 g
最小表示 [d]	0,1 µg
標準繰り返し性 [5% Max]	0,25 µg
標準繰り返し性 [Max]	0,4 µg
許容繰り返し性	0,6 µg
電気補償範囲	0 – +6,1 g
安定化時間	30 s
調整	規格に準拠 (着脱式アダプター)
ディスプレイ	10″ メンブレン式 + バッテリー赤外線式
計量皿寸法	24×50 mm
デバイスの寸法	1112×958×1570 mm
制御デバイスの寸法	249×170×72 mm
補足分銅	着脱式アダプター ()
マガジン位置	120
	1320x925x1050 mm
	電圧ループ: 227 kg; 動作モード: スレーブ: 302 kg
	960x610x680 mm
	電圧ループ: 24,5 kg; 動作モード: スレーブ: 87,5 kg
	1200x800x950 mm
	電圧ループ: 285 kg; 動作モード: スレーブ: 285 kg +IRエミッタ
通信インターフェース	2×USB-A, USB-C, RS 232 (COM3), HDMI, Ethernet, Wi-Fi^®, Hotspot
電源	110 – 240 V AC 50/60 Hz
動作温度	+15 – +30 °C
動作温度変化率	±0,5 °C / 12 h (±0,3 °C / 4 h)
相対湿度	40% – 60%
相対湿度変化率	±5% / 12 h (2% / 4 h)