Stainless Steel Platform Scale 600kg 200,00g H315.4.600.H6

Stainless steel platform scale with four sensors

No matter where you place the load on the platform, the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object.

It has been with us for years, and will stay for a long time to come

The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient.

Inner power

No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours).

Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Not just weighing

But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods.

Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that!

Work as you like

The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways.

The power of steel

The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale.

If you need a dual-range scale, we can make one for you at an extra cost.

データシート

最大ひょう量 [Max]	600 kg
最小荷重	4 kg
最小表示 [d]	200 g
法定計量時の単位 [e]	200 g
風袋範囲	-600 kg
非検定用はかりの最大可読性（目量）	50 g
OIMLクラス	III
ディスプレイ	LCD (構造)
ケーブル長	3 m
計量皿寸法	800×800 mm
計量プラットフォームの高さ	88 mm
梱包寸法	900×900×430 mm
インジケータ付きスケール質量	59 kg
総重量	80 kg
保護クラス	IP 66 / 69 ステンレススチール, IP 66 / 67 / 69 ステンレススチール
通信インターフェース	RS232, USB
オプションのインターフェース	RS232 内蔵充電式バッテリー RS485 内蔵充電式バッテリー 4IN/4OUT 内蔵充電式バッテリー Ethernet 内蔵充電式バッテリー手動、自動、時間指定 4-20 mA
電源	100 – 240 V AC 50/60 Hz
オプションの電源	密閉式
バッテリー駆動時間	max 7h
動作温度	-10 – +40 °C
相対湿度	10% – 85% RH 最大距離

Additional fee
for verification

ビデオ

Complete Solutions for Mass Measurement in Pharma Industry

機能

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Internal battery

Internal and rechargeable battery of SLA 6 V type (sealed lead acid) enables device operation without connecting the device to the mains (9h operation). The weighing instrument controls battery status and displays a respective pictogram on the screen.

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

ドキュメント

データシート

Data Sheet

表示する

ダウンロード

Choose more product:

表示する

ダウンロード

ユーザーマニュアル

User Manual - CBCP 01

表示する

ダウンロード

(0.30 MB)