Terminal de pesage PUE C32

Description

Boîtier et afficheur
Le boîtier est en matière ABS. Terminal est équipé d’un afficheur graphique 5’’ en couleurs garantissant la lisibilité parfaite et d’un clavier à membrane avec 22 touches librement programmables. Le menu peut être adapté aux besoins terminal de l’opérateur. De plus, il permet le service facile et intuitif.

Alimentation optionnelle par un accumulateur
Grâce à l’installation optionnelle d’un accumulateur, terminal PUE C32 peut fonctionner dans des conditions d'alimentation instable ou de son absence complète.

Interfaces de communication
terminal est équipé des interfaces RS 322, USB-A, USB-B, Ethernet, 4×Entrée, 4×Sortie. Les interfaces rendent possible la coopération avec beaucoup d’appareils externes, p.ex. une imprimante, un ordinateur ainsi que l’échange de données à l’aide des clés USB.
La connexion de terminal avec les réseaux sans fil est possible grâce au module de communication sans fil intégré Wireless Connection.

Gestion de données
Dans les terminal PUE C32, le système d’information est basé sur 7 bases de données avec le nombre maximum d’enregistrements :

Produits - 15 000
Utilisateurs - 500
Recettes - 500
Emballages - 500
Clients - 500
Étiquettes - 500
Variables universelles – 100

Les bases de données peuvent être importées et exportées en utilisant les clés USB.

Mémoire ALIBI
La mémoire ALIBI utilisée est une zone de sécurité des données et permet d’enregistrer jusqu’à 500 000 enregistrements de pesage. Cela garantit la sécurité de la continuité de la collecte de données à long terme.

Paramètres Techniques

Afficheur	5” graphique couleurs
Dimensions d'appareil	206×140×71 mm
Dimensions de colis	300×250×130 mm
Masse nette	0,7 kg
Masse brute	0,94 kg
Degré de protection	IP 43
Boîtier	matière ABS
Interface de Communication	2×RS232, USB-A, USB-B, Ethernet, 4 IN / 4 OUT (numériques), Wi-Fi^®
Alimentation	100 – 240 V AC 50/60 Hz
Alimentation optionnelle	accumulateur interne
Temps de travail avec l'alimentation d'accumulateur	5 heures
Nombre maximal d'échelons de légalisation	6000 e
Tension d'alimentation sur le transducteur tensometrique	0,4 µV
Pression maximale sur un échelon de légalisation	3,25 µV
Impédance minimale de transducteurs tensometriques	50 Ω
Impédance maximale de transducteurs tensometriques	1200 Ω
Tension d'alimentation sur le transducteur tensometrique	5V DC
Augmentation maximale de signal	39 mV
Connexion de senseurs tensometriques	4 ou 6 câble + écran
Température du travail	-10 – +40 °C
Multi - étendue	Oui
Nombre maximal de plate-formes desservies	1

* en option

Films

Solution complète pour la mesure de la masse en pharma

Fonctions

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.

Replaceable unit

Replaceable units.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

Documentation

Cartes de produits

Data Sheet

Voir

Download

Choose more product:
Voir

Voir

Download

Modes d'emploi

Mode d'emploi - CBCP 02

Voir

Download

(0.25 MB)