Terminal de pesaje PUE C32

Descripción

La carcasa y la pantalla
La carcasa está hecha de plástico ABS resistente. El terminal está equipado con una pantalla en color de 5 'que garantiza una lectura perfecta y un teclado de membrana de 22 teclas con teclas de función programables. El terminal ofrece un menú personalizado, con este todas sus necesidades personales se pueden cumplir lo que hace que la operación aún más intuitiva y sencilla.

La batería como fuente de alimentación opcional
El uso de la batería opcional permite que el terminal PUE C32 funcione incluso cuando no hay fuente de alimentación inestable o no.

Interfaces de comunicación
El terminal estándar ha sido equipado con interfaces RS 232, USB-A, USB-B y Ethernet que facilitan la cooperación con periféricos como la impresora o el ordenador y el intercambio de datos mediante unidades USB.
Aprenda que en su petición especial el PUE C32 puede ser equipado con el módulo de comunicación sin hilos que permite que el terminal conecte con redes sin hilos.

Gestión de datos
El sistema de información en los terminal PUE C32 se basa en 7 bases de datos con el número máximo de registros:

Productos- 15,000
Usuarios - 500
Recetas - 500
Embalaje - 500
Clientes - 500
Etiquetas - 500
Variables universales - 100

Las bases de datos se pueden importar y exportar utilizando dispositivos de almacenamiento masivo USB externos.

Memoria ALIBI
La memoria ALIBI proporciona seguridad de datos y permite ahorrar hasta 500 mil registros de pesaje. Esto garantiza el almacenamiento continuo de datos durante un largo periodo de tiempo.

Datos tecnicos

Pantalla	5” gráfico color
Dimensiones de aparato	206×140×71 mm
Dimensiones de embalaje	300×250×130 mm
Masa neta	0,7 kg
Masa bruta	0,94 kg
Grado de protección	IP 43
Chasis	material ABS
Conectividad	2×RS232, USB-A, USB-B, Ethernet, 4 IN / 4 OUT (digitales), Wi-Fi^®
Alimentacion	100 – 240 V AC 50/60 Hz
Corriente de alimentación adicional	batería interna
Horas de trabajo con baterias	5 horas
Numero máximo de divisiones legalizadas	6000 e
Corriente mínima de 1 división legalizada	0,4 µV
Corriente maxima en una división legalizada	3,25 µV
Impedancia mínima de convertidor tensometrico	50 Ω
Impedancia máxima de convertidor tensométrico	1200 Ω
Corriente de alimentación en convertidor tensométrico	5V DC
Crecimiento maximo de la señal	39 mV
Conexión de convertidores tensométricos	4 o 6 hilos + Blindaje de cable
Temperatura de trabajo	-10 – +40 °C
Multirangos	SI
Numero máximo de plataformas en servicio	1

* - versión opcional

Vídeos

Complete Solutions for Mass Measurement in Pharma Industry

Funciones

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.

Replaceable unit

Replaceable units.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

Documentación

Tarjetas de productos

Data Sheet