Báscula multifuncional de plataforma empotrada de acero inoxidable HX7.4.1500.H8/9/Z

La balanza HX7.4 H / Z fue construida sobre la base del terminal PUE HX7 y una plataforma para hundimientos de cuatro sensores hecha de acero inoxidable AISI 304. El alto grado de protección IP66 / IP68 permite el uso de balanzas en condiciones industriales.

HX7.4 H/Z

La comodidad del usuario garantiza: menú claro, pantalla de color con una barra gráfica de 9 LED en verde o rojo, que muestra el peso neto actual de la carga en relación con el rango de balanza o los umbrales mínimo y máximo declarados. En la parte trasera del indicador, hay conexiones herméticas para las interfaces de comunicación RS232, RS485, USB, Ethernet, entradas / salidas digitales y salidas analógicas. Permiten la cooperación con muchos dispositivos externos, tales como: escáneres de códigos de barras, impresoras, pantallas externas de masa, botones de control, columnas de luz, zumbadores y otros dispositivos de control / señalización, así como sistemas de control automático y control de procesos y sistemas de información superiores. El soporte le permite colocar el indicador en cualquier superficie plana horizontal o atornillada a la pared con la posibilidad de ajustar el ángulo de inclinación.

El software le permite realizar procesos de pesaje, conteo de piezas, dosificación, etiquetado y control de desviación porcentual.

En los indicadores, el sistema de información se basa en bases de datos:

usuarios,
bienes,
pesajes,
embalajes,
recetas,
clientes,
memoria Alibi garantizando la seguridad de los datos recogidos.

El marco para empotrar (cimentación) forma parte del set; lo recibirá junto con la plataforma solicitada.

Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications

Datos tecnicos

Maxima capacidad [Max]	1500 kg
Minima capacidad	10 kg
Legibilidad [d]	500 g
División de legalización [e]	500 g
Rango de tara	-1500 kg
Legibilidad máxima para las balanzas no verificadas	100 g
Clase OIML	III
Pantalla	7” gráfico color
Longitud del cable	3 m
Dimensión de platillo	1200×1500 mm
Dimensiones de embalaje	1700×1400×550 mm
Masa neta	176 kg
Masa bruta	220 kg
Grado de protección	IP 68 construcción, IP 66 / 68 medidor
Teclado	membrana
Construcción	Acero inoxidable AISI304
Conectividad	RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus RTU
Interfaces opcionales	USB (M12 4P), Ethernet, módulo RS485, módulo RS232, módulo Profibus (Dp SLAVE), PROFINET (RRJ45), EtherNet/IP (RRJ45), 12 IN, 12 OUT, 4-20mA, 0-10V
Alimentacion	100 – 240 V AC 50/60 Hz
Consumo máximo de potencia	25 W
Corriente de alimentación adicional	12 – 24 V DC
Temperatura de trabajo	-10 – +40 °C
Temperatura de almacenamiento	-10 – +50 °C
Humedad relativa de aire	10% – 80% RH sin condensación
Medidor	PUE HX7
Número de botones	22
Numero máximo de plataformas en servicio	2

Additional fee
for verification

Vídeos

Complete Solutions for Mass Measurement in Pharma Industry

Funciones

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.

Replaceable unit

Replaceable units.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

Documentación

Tarjetas de productos

Data Sheet