HY10.15/30.H3.CPC Bilance multifunzione

✆
Radwag Bilance e sistemi di pesatura
Nuovi prodottiNuovi prodotti
Selected language Italiano
casa > ... > Bilance per controllo prodotti preconfezionati - controllo statistico > Bilance HY10.H per controllo CPC > HY10.15/30.H3.CPC Bilance multifunzione
HY10.15/30.H3.CPC Bilance multifunzione
This image is for reference only.

HY10.15/30.H3.CPC Bilance multifunzione

Codice prodotto: WK-311-1009
Modifica del modello (7)
done
HY10.15/30.H3.CPC Bilance multifunzione
Max: 15 / 30kgd: 5 / 10g

⤢

 410×410mm
expand_more
HY10.1,5/3.H1.CPC Bilance multifunzione
Max: 1,5 / 3kgd: 0,5 / 1g

⤢

 150×200mm
HY10.3/6.H2.CPC Bilance multifunzione
Max: 3 / 6kgd: 1 / 2g

⤢

 250×300mm
HY10.3/6.H1.CPC Bilance multifunzione
Max: 3 / 6kgd: 1 / 2g

⤢

 150×200mm
HY10.6/15.H2.CPC Bilance multifunzione
Max: 6 / 15kgd: 2 / 5g

⤢

 250×300mm
HY10.6/15.H3.CPC Bilance multifunzione
Max: 6 / 15kgd: 2 / 5g

⤢

 410×410mm
HY10.30/60.H3.CPC Bilance multifunzione
Max: 30 / 60kgd: 10 / 20g

⤢

 410×410mm
Portata massima [Max]: 15 / 30 kg
Divisione [d]: 5 / 10 g

close
Modifica del modello:
✓ HY10.1,5/3.H1.CPC Bilance multifunzione
✓ HY10.3/6.H2.CPC Bilance multifunzione
✓ HY10.3/6.H1.CPC Bilance multifunzione
✓ HY10.6/15.H2.CPC Bilance multifunzione
✓ HY10.6/15.H3.CPC Bilance multifunzione
✓ HY10.15/30.H3.CPC Bilance multifunzione
✓ HY10.30/60.H3.CPC Bilance multifunzione
Select all
Vista
Salva
Voglio saperne di più
Aggiungere a confrontare
Caratteristiche generali

Bilancia HY10.H per controllo statistico

 
Le bilance serie HY10.CPG sono state pensate come strumenti dedicati al controllo peso dei prodotti preconfezionati in postazioni singole ed autonome.Le bilance serie HY10.CPG sono equipaggiate con un modulo per il controllo dei prodotti preconfezionati. Il modulo e supportato da un database contenente le informazioni dei prodotti e la lista degli operatori. Ogni controllo finisce quando e stata verificata la quantita di prodotti (campioni) predefinita. Il numero di prodotti da controllare viene definito automaticamente dalla bilancia in funzione della quantita di prodotti compresi nel lotto. Il sistema e equipaggiato da un display touch screen grafico a colori e da una tastiera alfanumerica (completa) che permettono di gestire le operazioni della bilancia e l’impostazione dei parametri di controllo.
 
 
 

Ogni ciclo di controllo segue il seguente schema operativo:

  • Scelta dell’operatore,
  • Scelta del prodotto,
  • Inizio del controllo,
  • Acquisizione dei valori delle pesate,
  • Il controllo si ferma automaticament quando e stato pesato il numero di campioni necessario,
  • Stampa del relativo rapporto.
Ogni ciclo di controllo eseguito viene terminato con la redazione di un rapporto finale contenente tutte le informazioni necessarie per redigere un report in conformita alle normative per il controllo dei prodotti preconfezionati. Il rapporto viene automaticamente salvato nella memoria della bilancia ed allo stesso tempo puo essere stampato mediante una stampante connessa.
 
 
Lo scopo della bilancia è quello di controllare le merci preconfezionate (CPG), quindi è necessaria la legalizzazione.
Si consiglia di ordinare una bilancia con la legalizzazione appropriata.
 
 
Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications
Specifiche
Portata massima [Max]

15 / 30

 kg

Portata minima [Min]

100 / 200

 g

Divisione [d]

5 / 10

 g

Intervallo di verifica della bilancia [e]

5 / 10

 g

Campo di tara

-30

 kg

Classe OIML

III

 

Display

10,1″ graphic colour touchscreen

 

Lunghezza del cavo

2,5

 m

Dimensione piatto

410×410

 mm

Dimensioni del pacco

510×510×500

 mm

Peso netto

12,9

 kg

Peso lordo

18

 kg

Punteggio IP

IP 68 construction, IP 68 (1h max)/69 terminal

 

Interfaccia

2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digital)

 

Interfacce opzionali

module Wi-Fi® 802.11 b/g/n, module Profibus (DP SLAVE), module RS485, module PROFINET (RJ45), analog output module (4-20mA, 0-20mA, 0-10V) , 12IN / 12OUT (IN – 5-24 VDC, OUT – max 30 VDC, 0,5 ADC)

 

Alimentatore

100 – 240 V AC 50/60 Hz

 

Ambiente di lavoro

-10 – +40

 °C

Umidità relativa

10% – 85% RH no condensation

 

CE
Garanzia 2 anni
Verifica automatica della bilancia
controllo prodotti preconfezionati
Video
Complete Solutions for Mass Measurement in Pharma Industry
HY10 Advanced weighing terminal
RADWAG Remote Desktop
RADWAG Remote Desktop - Windows 10
Funzioni
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Labelling

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).
Plus/Minus Control

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Totalizing

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Replaceable unit

Replaceable unit

Replaceable units.
Statistical Quality Control

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
Packaged Goods Control

Packaged Goods Control

Pre-packaged Goods Control mode enables to collect weighings from RADWAG-designed weighing instruments, carry out control and generate PGC reports. Different types of weighing instruments can be combined into a network. The control can be started on a balance or via computer software. It is automatically finished after a respective quantity of packages is verified.
Collected data allows you to assess quality of produced pre-packaged goods and their conformity with:
- internal quality control system;
- 'Pre-Packaged Goods' regulation of 7th May 2009 (Journal of Laws No 91, item 740), on the requirements concerning quantity inspection of pre-packaged goods control, which inspection is to be carried out by means of random selection of the measurements results and sending those results to pre-packaged goods control procedure.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Transactions

Transactions

Complex weighing mode for registration of weighings that are part of transactions such as sale, purchase and warehouse transfer. You can create a new transaction using the scale. It is possible to pause the transaction or abort it.  The function supports warehouse management in an enterprise.
Documentazione
Data Sheet Data Sheet
Data Sheet

Vista
Vista
Salva
Salva

Choose more product:
Vista Vista SalvaSalva
Software Manual - CBCP 03
Software Manual - CBCP 03
Vista
Vista
Salva
Salva
(0.23 MB)
User Manual - PUE HY10
User Manual - PUE HY10
Vista
Vista
Salva
Salva
(2.19 MB)
Start up Guide
Start up Guide
Vista
Vista
Salva
Salva
(1.38 MB)
User Manual - HY10 multifunctional scales
User Manual - HY10 multifunctional scales
Vista
Vista
Salva
Salva
(1.88 MB)
Software Manual - PUE HY10
Software Manual - PUE HY10
Vista
Vista
Salva
Salva
(7.10 MB)
Software Manual - Radwag-Mass -Node-RED
Software Manual - Radwag-Mass -Node-RED
Vista
Vista
Salva
Salva
(0.57 MB)
Software Manual - PROFIBUS communication protocol of PUE HY10
Software Manual - PROFIBUS communication protocol of PUE HY10
Vista
Vista
Salva
Salva
(0.65 MB)
Quick start
Quick start
Vista
Vista
Salva
Salva
(2.47 MB)
Software Manual - Appendices 01
Software Manual - Appendices 01
Vista
Vista
Salva
Salva
(1.81 MB)
User Manual - Connecting External Platform
User Manual - Connecting External Platform
Vista
Vista
Salva
Salva
(0.99 MB)
Software Manual - PROFINET communication protocol of PUE HY10
Software Manual - PROFINET communication protocol of PUE HY10
Vista
Vista
Salva
Salva
(1.82 MB)
Conformity Declaration
Conformity Declaration
Vista
Vista
Salva
Salva
(0.04 MB)
RTP Thermal Receipt Printer
RTP Thermal Receipt Printer
Vista
Vista
Salva
Salva
(1.64 MB)
THBR System 2.0
THBR System 2.0
Vista
Vista
Salva
Salva
(5.17 MB)
Stainless Steel in RADWAG products. Standard and special applications
Stainless Steel in RADWAG products. Standard and special applications
Vista
Vista
Salva
Salva
(2.23 MB)
PUE HY10 - Weighing Terminal
PUE HY10 - Weighing Terminal
Vista
Vista
Salva
Salva
(2.55 MB)
Accessori
Moduli supplementari
Offerte
Prodotti
Nuovi prodotti
Supporto
Calibrazione
User manuals
Download
Assitenza
Assitenza in remoto
Cataloghi
Pubblicazioni
Blog
Service evaluation survey
Fill out the RMA service request
Webinars
Radwag
Azienda
Sistema di qualita ISO
Certificazione dei prodotti
Premi e riconoscimenti
Fiere e congressi
Contatti
Privacy policy
Radwag bilance e sistemi di pesatura
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 60 00
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2024 Radwag bilance e sistemi di pesatura. Diritti riservati

selezionare

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on Deutsch Deutsch
Change language page on English English
Change language page on Español Español
Change language page on Français Français
Change language page on Polski Polski
Change language page on Türkiye Türkiye
Česky
Português (Brasil)
Change website to USA USA
Change language page on 中文 中文
Presentations Presentations Presentations
Subscribe Subscribe Subscribe
Radwag in Facebook Radwag in Facebook Facebook
Radwag in YouTube Radwag in YouTube Youtube
Radwag in Vimeo Radwag in Vimeo Vimeo
Radwag in LinkedIn Radwag in LinkedIn LinkedIn
Webinars Radwag Webinars Radwag Webinars
close
E-mail
nome azienda:
Nome:
I consent to the processing of my personal data for marketing purposes by Radwag Wagi Elektroniczne Witold Lewandowski.
I consent to receive marketing and product-related messages by electronic means from Radwag Wagi Elektroniczne Witold Lewandowski.
I have read the Privacy Policy of RADWAG Wagi Elektroniczne Witold Lewandowski.
lock_openI want to access the files
close
Slide to go back ↩