Waage WPY 15/30.C2.K.FPVO

Radwag Elektronische Waagen

de

Deutsch English Español Français Italiano Polski Türkiye Česky USA

Home > Produkte > FPVO Waagen > Waagen für statistische Kontrolle > Waagen WPY für FPVO > Waage WPY 15/30.C2.K.FPVO

Übersichtsbild

Waage WPY 15/30.C2.K.FPVO

Produktcode: WK-308-1035

Modell ändern (13)

done

Waage WPY 15/30.C2.K.FPVO

Max: 15 / 30kgd: 5 / 10g

⤢

400×500mm

expand_more

Waage WPY 0.6/1.5.D2.FPVO

Max: 0,6 / 1,5kgd: 0,2 / 0,5g

⤢

195×195mm

Waage WPY 1,5/3.D2.FPVO

Max: 1,5 / 3kgd: 0,5 / 1g

⤢

195×195mm

Waage WPY 3/6.F1.K.FPVO

Max: 3 / 6kgd: 1 / 2g

⤢

300×300mm

Waage WPY 3/6.F1.R.FPVO

Max: 3 / 6kgd: 1 / 2g

⤢

300×300mm

Waage WPY 3/6.D2.FPVO

Max: 3 / 6kgd: 1 / 2g

⤢

195×195mm

Waage WPY 6/15.F1.K.FPVO

Max: 6 / 15kgd: 2 / 5g

⤢

300×300mm

Waage WPY 6/15.F1.R.FPVO

Max: 6 / 15kgd: 2 / 5g

⤢

300×300mm

Waage WPY 15/30.C2.R.FPVO

Max: 15 / 30kgd: 5 / 10g

⤢

400×500mm

Waage WPY 15/30.F1.K.FPVO

Max: 15 / 30kgd: 5 / 10g

⤢

300×300mm

Waage WPY 15/30.F1.R.FPVO

Max: 15 / 30kgd: 5 / 10g

⤢

300×300mm

Waage WPY 30/60.C2.K.FPVO

Max: 30 / 60kgd: 10 / 20g

⤢

400×500mm

Waage WPY 30/60.C2.R.FPVO

Max: 30 / 60kgd: 10 / 20g

⤢

400×500mm

Wägebereich [Max]: 15 / 30 kg
Ziffernschritt [d]: 5 / 10 g

close

Modell ändern:

✓ Waage WPY 0.6/1.5.D2.FPVO

✓ Waage WPY 1,5/3.D2.FPVO

✓ Waage WPY 3/6.F1.K.FPVO

✓ Waage WPY 3/6.F1.R.FPVO

✓ Waage WPY 3/6.D2.FPVO

✓ Waage WPY 6/15.F1.K.FPVO

✓ Waage WPY 6/15.F1.R.FPVO

✓ Waage WPY 15/30.C2.K.FPVO

✓ Waage WPY 15/30.C2.R.FPVO

✓ Waage WPY 15/30.F1.K.FPVO

✓ Waage WPY 15/30.F1.R.FPVO

✓ Waage WPY 30/60.C2.K.FPVO

✓ Waage WPY 30/60.C2.R.FPVO

Select all

Details anzeigen

Ich möchte mehr wissen

zum Vergleich Erweiterte Suche

Waage WPY für statistische Kontrolle

In der Waage WPY/FPVO ist ein Modul verantwortlich für die Kontrolle der gepackten Produkte implementiert, das eine Datenbank mit Produkten und Bedienern nutzt. Die durch die Waage geführte Kontrolle endet automatisch nach dem Überprüfen einer entsprechenden Anzahl von Paketen (Probelauf), die durch das Wägeprogramm in Abhängigkeit von der Menge der Produkte in der Charge festgelegt wird. Die Waage ist mit einem graphischen 5,7'' Touchscreen ausgestattet, auf dem Informationen über die aktuell geführte Kontrolle und die Ergebnisse angezeigt werden.

Der Kontrollzyklus verläuft nach dem nachfolgenden Schema:

Auswahl des Bedieners,
Auswahl des Produktes,
Start der Kontrolle,
Wägen,
Automatischer Abschluss der Kontrolle nach Wägen einer bestimmten Anzahl der Pakete,
Ausdruck des Kontrollprotokolls.

Jede durchgeführte Kontrolle endet mit einem Abschlussprotokoll, das alle für das Kontrollprotokoll der gepackten Produkte notwendigen Informationen enthält. Das Protokoll wird automatisch im internen Speicher der Waage gespeichert und kann auch gleichzeitig auf einem an die Waage angeschlossenen Drucker gedruckt werden.

Der Zweck der Waage ist die Kontrolle von Fertigpackungen (FPVO). Denken Sie daher daran, dass eine Eichung erforderlich ist.
Wir empfehlen die Bestellung einer Waage mit entsprechender Eichung.

Edelstahl in RADWAG-Produkten
Erfahren Sie mehr über die Verwendung und Pflege von Edelstahlprodukten:
Rostfreier Stahl in RADWAG-Produkten. Standard- und Spezialanwendungen

Technische Daten

Wägebereich [Max]	15 / 30 kg
Min. Belastung	100 / 200 g
Ziffernschritt [d]	5 / 10 g
Tarierbereich	-30 kg
OIML-Klasse	III
Display	5,7” Resistiv-Farb-Touchscreen
Kabellänge	2,5 m
Waagschale	400×500 mm
Verpackungsgröße	720×620×210 mm
Schnittstellen	2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (Digitalausgang), Wi-Fi^®
Stromversorgung	100 – 240 V AC 50/60 Hz
Umgebungstemperatur	-10 – +40 °C
Relative Luftfeuchtigkeit	10% – 85% RH ohne Kondensation

Garantie 2 Jahre

Eichung

Fertigpackungskontrolle

Complete Solutions for Mass Measurement in Pharma Industry

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.

Packaged Goods Control

Pre-packaged Goods Control mode enables to collect weighings from RADWAG-designed weighing instruments, carry out control and generate PGC reports. Different types of weighing instruments can be combined into a network. The control can be started on a balance or via computer software. It is automatically finished after a respective quantity of packages is verified.
Collected data allows you to assess quality of produced pre-packaged goods and their conformity with:
- internal quality control system;
- 'Pre-Packaged Goods' regulation of 7th May 2009 (Journal of Laws No 91, item 740), on the requirements concerning quantity inspection of pre-packaged goods control, which inspection is to be carried out by means of random selection of the measurements results and sending those results to pre-packaged goods control procedure.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

Datenblatt

Data Sheet

Data Sheet

Data Sheet

Details anzeigen

Details anzeigen

Download

Download

Choose more product:

Details anzeigen

Download

Bedienungsanleitungen

User Manual - WPY Multifunctional Scale

User Manual - WPY Multifunctional Scale

Details anzeigen

Details anzeigen

Download

Download

(1.68 MB)

Software Manual - CBCP 03

Software Manual - CBCP 03

Details anzeigen

Details anzeigen

Download

Download

(0.23 MB)

Start up Guide

Start up Guide

Details anzeigen

Details anzeigen

Download

Download

(1.26 MB)

Quick start

Quick start

Details anzeigen

Details anzeigen

Download

Download

(2.47 MB)

Software Manual - Appendices 01

Software Manual - Appendices 01

Details anzeigen

Details anzeigen

Download

Download

(1.81 MB)

Software Manual - PUE 7.1

Software Manual - PUE 7.1

Details anzeigen

Details anzeigen

Download

Download

(6.55 MB)

Konformitätserklärungen

Conformity Declarations

Conformity Declarations

Details anzeigen

Details anzeigen

Download

Download

(0.04 MB)

Publikationen und Broschüren

RTP Thermal Receipt Printer

RTP Thermal Receipt Printer

Details anzeigen

Details anzeigen

Download

Download

(1.64 MB)

THBR System 2.0

THBR System 2.0

Details anzeigen

Details anzeigen

Download

Download

(5.19 MB)

Stainless Steel in RADWAG products. Standard and special applications

Stainless Steel in RADWAG products. Standard and special applications

Details anzeigen

Details anzeigen

Download

Download

(2.23 MB)

Wageterminal PUE 7.1

Wageterminal PUE 7.1

Details anzeigen

Details anzeigen

Download

Download

(0.32 MB)

Zubehör

Kabel P0108.10

Kabel P0108.5

Kabel P0108

Kabel P0108.2

Kabel P0108.5

Ausgang der Stromschnittstelle AP2-1

Zubehör

Ausgang der Stromschnittstelle AP2-1 (im Kunststoffgehäuse)

Zubehör

Kabel PT0287

Kabel P0151

Konverter RS 232 – USB

Zubehör

Moxa UPort 1110 Konverter

Zubehör

Kabel PT0128

Anschlusskabel für Zigarettenanzünder

Zubehör

Kabel K0047

Zubehör

RADWAG RTP-UEW80 Belegdrucker (USB + Ethernet + WiFi)

RADWAG RTP-RU80 Belegdrucker (RS232 + USB)

Modul für zusätzliche Wägeplattformen

Zubehör

DP-6 Modul

Etikettendrucker

Zubehör

Zebra ZD 421t Thermodrucker

Prüfgewichte der F1 Klasse - Knopfgewichte, Sätze

Zubehör

Prüfgewichte der F1 Klasse - Knopfgewichte, Set (1 mg – 50 g), Kunststoff-Etui

Tastaturen, Taster

Zubehör

Externe Tara und Print Taster

Zubehör

Wandhalterung für Wägeterminal PUE C32 / PUE 7.1

Stativ für Wägeterminal PUE C32 / PUE 7.1

Audit Trail Reader

Zubehör

Audit Trail Reader

Zubehör

E2R Wägung

E2R FPVO

E2R Evidenz

Etiketten Editor R02

Zubehör

Etiketten-Editor R02

Waagen-Editor 2.1

Zubehör

Scale Editor 2.1

Zubehör

Barcode-Scanner LS2208

Barcode-Scanner PowerScan PD9630-SRK1

Barcode-Scanner DS2208

Barcode-Scanner PowerScan PM9600-SR433RBK20

Barcode-Scanner PowerScan PD9630-SRK2

Barcode-Scanner PowerScan PM9600-SR433RBK10

Zubehör

RLAB

Zubehör

RAD Key

RADWAG Development Studio

Zubehör

RADWAG Development Studio

RADWAG Remote Desktop

Zubehör

Radwag Remote Desktop

Zubehör

Zusatzdisplay WD-4/4

Transponderkartenleser

Zubehör

Transponderkartenleser CK-02/4

Zubehör

ZR-04/1 Powerbank

Zusätzliche Module

Audit Trail3

RES Radwag Kommunikationsprotokoll3

Workflow-Modul (Funktionalität “Identifikationsprozess”)3

RDA - Datenzugangsmodul (RADWAG Data Access)3

Angebot

Produkte
Neue Produkte

Customer Support

Eichung
User manuals
Dateien herunterladen
Service
Fernunterstützung
Kataloge
Publikationen
Blog
Produktregistrierung
Fill out the RMA service request
Webinars

Radwag

Firma
Impressum
ISO-Qualitätssystem
Produkt-Zertifikate
Preise und Auszeichnungen
Messen und Konferenzen
Kontakt
Datenschutzerklärung

RADWAG Elektronische Waagen

Torunska 5
26-600 Radom
Polen
Tel.: +48 48 386 60 00
E-mail: export@radwag.com
VAT Nr.: 796-000-03-27

Vimeo Radwag

YouTube Radwag

Facebook Radwag

LinkedIn Radwag

© 2024 RADWAG Elektronische Waagen. Alle Rechte vorbehalten.

close

close

Slide to go back ↩