Wägeterminal PUE CY10

✆
Radwag Elektronische Waagen
Neue ProdukteNeue Produkte KatalogeKataloge
Selected language Deutsch
Home > Produkte > Wägeterminals > Wägeterminal PUE CY10 > Wägeterminal PUE CY10
Wägeterminal PUE CY10
Übersichtsbild

Wägeterminal PUE CY10

Produktcode: WX-008-0217
close
Modell ändern:
✓ Wägeterminal PUE CY10
Select all
Details anzeigen
Download
Ich möchte mehr wissen
Erweiterte Suche
Beschreibung
 

Wägeterminal PUE CY10

 
Das Terminal PUE CY10 ist die Anzeige der CY10-Serie von Präzisionswaagen und 1-Wägezelle-Plattformwaagen. Es verfügt über ein robustes Gehäuse mit Schutzart IP 43 und zahlreiche Kommunikationsschnittstellen, darunter Ethernet, Hotspot und Wi-Fi®® (vollständige Liste unten).
 
 

Passende Innovation für ELLIPSIS

Das PUE CY10-Terminal verfügt über alle Stärken des 5Y-Terminals, das in den Waagen der ELLIPSIS-Serie verwendet wird, d.h:
  • 10-Zoll-Display
  • Individuelle Benutzerüberprüfung
  • Hotspot - Verwenden Sie die Waage auf einem beliebigen Gerät, das mit ihr verbunden ist. Dies kann ein Smartphone, ein Tablet oder ein Computer sein
  • RFID ermöglicht den Zugang zu bestimmten Funktionen durch die Radiofrequenz-Identifikation
  • Live Note Sprach- und Textnotizen
  • Sprachsteuerung für das Gerät
  • Messungshistorie innerhalb einer übersichtlichen Bibliothek
  • Widgets - Vorbereitet für die Anzeige dessen, was Sie gerade am meisten brauchen
  • Ambient Light - Die Lichtfarbe informiert Sie über Status, Prozessergebnisse, Vorgänge oder Warnungen.
 
 
 

Funktionalität für Etikettierwaagen

Die PUE CY10-Terminalfunktionen wurden um spezifische Funktionen für Etikettierwaagen erweitert. Es:
  • Arbeitet mit dem Computerprogramm Label Editor R02 zusammen
  • Ist kompatibel mit ZEBRA-Etikettendruckern
  • Unterstützt Einzeletiketten, Etiketten in Großmengen und Etiketten aus Großmengen
  • Ermöglicht den Import/Export von Etikettenentwürfen über einen USB-Stick
  • Ermöglicht die Zuweisung von Etiketten zu Waren oder Kunden und den Druck eines globalen Etiketts
 
 
 

Software für spezielle Aufgaben

Die Software des PUE CY10-Terminals verfügt über eine Reihe von innovativen Funktionen, die die tägliche Arbeit mit der Waage erleichtern:
  • Bis zu 2 Wägeplattformen anschließbar
  • Aktualisierung der statistischen Daten separat für jede Ware oder global
  • Taramodus wurde um die Möglichkeit erweitert, im Modus “Ausgabe des Endprodukts” zu arbeiten
 
 
 
 

Modbus TCP/IP

ist eines der beliebtesten Kommunikationsprotokolle in der industriellen Automatisierung. Die Implementierung in den Waagen 5Y und CY10 macht die Geräte dieser Serie benutzerfreundlich für Automatisierungsintegratoren.
 
Eine Waage im Modbus-System ist ein untergeordnetes Gerät (Slave) und führt Aufgaben aus, die vom übergeordneten Gerät (Master) definiert sind, das in der Regel ein PLC-Steuergerät ist. Das Modbus TCP/IP-Protokoll in den Waagen 5Y und C10 ermöglicht unter anderem die Durchführung von Funktionen wie das Lesen des Gewichts, Nullstellen und Tarieren der Waage sowie das Einstellen von Tara und MIN- und MAX-Schwellenwerten.

 
 
 
 

Wi-Fi® ist eine eingetragene Marke der Wi-Fi Alliance®.
Technische Daten
Display

10″ grafisch farbiger Touchscreen

 

Schutzart

IP 43

 

Gehäuse

ABS + aluminium

 

Schnittstellen

2×USB-A, USB-C, HDMI, Ethernet, Wi-Fi®, Hotspot

 

Stromversorgung

12 – 15 V DC

 

Stromverbrauch

1 A

 

Max. Anzahl der Eichwerte

10000

 

Min. Spannung auf Eichwert

0,4 µV

 

Max. Spannung auf Eichwert

3,25 µV

 

Min. Impedanz der DMS-Zellen

50 Ω

 

Max. Impedanz der DMS-Zellen

1200 Ω

 

Versorgungsspannung DMS-Zelle

5V

 

Max. Signalzunahme

19,5 mV

 

Verbindung DMS-Zellen

4 oder 6 Kabel + Abschirmung

 

Umgebungstemperatur

-10 – +40

 °C

Betriebssystem

Linux

 

Prozessor

quad-core Broadcom 1,5 GHz

 

Speicher

16 GB, 2GB RAM

 

Mehrbereich

JA

 

Max. Anzahl der Plattformen

max.2

 

CE
Eichung Extra payment
for verification
Garantie 2 Jahre
Videos
New Menu Language in 5Y Series Balances: Japanese
PUE CY10 – Modern Technology in Industry
Complete Solutions for Mass Measurement in Pharma Industry
Funktionen
Autotest

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Pipettes Calibration

Pipettes Calibration

Function verifying correctness of piston pipettes functioning, the verification is performed via gravimetric measurement of the excreted liquid. Pipettes calibration may be either a stand-alone module or it may be operated
Air density correction

Air density correction

Function performing correction of mass measurement indication, wherein the air density is taken into account. It is used in balances with reading unit < 0,01 mg.
Density determination

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of  under-pan weighing. Tested load of significant size may be measured this way.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Ambient conditions monitoring

Ambient conditions monitoring

The possibility of cooperation with the THBR 2.0 system
Statistical Quality Control

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
Packaged Goods Control

Packaged Goods Control

Pre-packaged Goods Control mode enables to collect weighings from RADWAG-designed weighing instruments, carry out control and generate PGC reports. Different types of weighing instruments can be combined into a network. The control can be started on a balance or via computer software. It is automatically finished after a respective quantity of packages is verified.
Collected data allows you to assess quality of produced pre-packaged goods and their conformity with:
- internal quality control system;
- 'Pre-Packaged Goods' regulation of 7th May 2009 (Journal of Laws No 91, item 740), on the requirements concerning quantity inspection of pre-packaged goods control, which inspection is to be carried out by means of random selection of the measurements results and sending those results to pre-packaged goods control procedure.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Wi-Fi®

Wi-Fi®

Thanks to wireless communication between the computer and a balance, it is possible to use a balance inside a laminar flow hood and a fume cupboard.

Dokumentation
Datenblatt
Data Sheet Data Sheet
Data Sheet

Details anzeigen
Details anzeigen
Download
Download

Choose more product:
Details anzeigen Details anzeigen DownloadDownload
Bedienungsanleitungen
User Manual
User Manual
Details anzeigen
Details anzeigen
Download
Download
(1.94 MB)
User Manual
User Manual
Details anzeigen
Details anzeigen
Download
Download
(1.24 MB)
Software Manual
Software Manual
Details anzeigen
Details anzeigen
Download
Download
(1.23 MB)
Start up Guide
Start up Guide
Details anzeigen
Details anzeigen
Download
Download
(3.12 MB)
CY10 Software Manual
CY10 Software Manual
Details anzeigen
Details anzeigen
Download
Download
(4.07 MB)
Publikationen und Broschüren
RFID
RFID
Details anzeigen
Details anzeigen
Download
Download
(0.68 MB)
Hybrid Protective Glass
Hybrid Protective Glass
Details anzeigen
Details anzeigen
Download
Download
(1.86 MB)
Zubehör
Angebot
Produkte
Neue Produkte
Customer Support
Eichung
User manuals
Dateien herunterladen
Service
Fernunterstützung
Kataloge
Publikationen
Blog
Produktregistrierung
Fill out the RMA service request
Webinars
Radwag
Firma
Impressum
ISO-Qualitätssystem
Produkt-Zertifikate
Preise und Auszeichnungen
Messen und Konferenzen
Kontakt
Datenschutzerklärung
RADWAG Elektronische Waagen
Torunska 5
26-600 Radom
Polen
Tel.: +48 48 386 60 00
E-mail: export@radwag.com
VAT Nr.: 796-000-03-27
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2024 RADWAG Elektronische Waagen. Alle Rechte vorbehalten.

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on English English
Change language page on Español Español
Change language page on Français Français
Change language page on Italiano Italiano
Change language page on Polski Polski
Change language page on Türkiye Türkiye
Česky
Português (Brasil)
Change website to USA USA
Change language page on 中文 中文
Presentations Presentations Presentations
Subscribe Subscribe Subscribe
Radwag in Facebook Radwag in Facebook Facebook
Radwag in YouTube Radwag in YouTube Youtube
Radwag in Vimeo Radwag in Vimeo Vimeo
Radwag in LinkedIn Radwag in LinkedIn LinkedIn
Webinars Radwag Webinars Radwag Webinars
close
E-Mail
Firma:
Vorname:
I consent to the processing of my personal data for marketing purposes by Radwag Wagi Elektroniczne Witold Lewandowski.
I consent to receive marketing and product-related messages by electronic means from Radwag Wagi Elektroniczne Witold Lewandowski.
I have read the Privacy Policy of RADWAG Wagi Elektroniczne Witold Lewandowski.
lock_openI want to access the files
close
Slide to go back ↩