Name: Terminal de Pesagem PUE C32
Brand: RADWAG
SKU: WX-008-0141
Price: 874.53 EUR
Availability: InStock

Visão geral

A Carcaça e o Visor

A carcaça é feita de plástico ABS durável. O terminal está equipado com um visor colorido de 5 polegadas que garante perfeita visualização e um teclado de membrana de 22 teclas com teclas de função programáveis. O terminal oferece menus personalizáveis, atendendo a todas as suas necessidades e tornando a operação ainda mais intuitiva e simples.

Bateria como fonte de alimentação opcional

O uso da bateria opcional permite que o terminal PUE C32 funcione mesmo quando não houver alimentação elétrica ou esta for instável.

Interfaces de comunicação

O terminal padrão está equipado com interfaces RS 232, USB-A, USB-B, 4 entradas, 4 saídas e Ethernet, que facilitam tanto a cooperação com periféricos como impressoras ou computadores quanto a troca de dados usando unidades USB. O terminal se conecta a redes sem fio graças a um módulo de conexão sem fio, que vem como padrão.

Gestão de Dados

O sistema de informação PUE C32 baseia-se em 7 bases de dados, cada uma com uma quantidade máxima de registos diferente:

Produtos - 15 000
Operadores - 500
Formulações - 500
Embalagens - 500
Clientes - 500
Etiquetas - 500
Variáveis universais - 100

As bases de dados podem ser importadas e exportadas através de pen drives USB.

Memória ALIBI

A memória ALIBI proporciona segurança de dados e permite salvar até 500 mil registros de pesagem. Isso garante o armazenamento contínuo de dados por um longo período de tempo.

Ficha Técnica

Display	5” gráfico colorida
Dimensões até dispositivo L x P x A	206×140×71 mm
Dimensões da embalagem L x P x A	300×250×130 mm
Peso líquido	0,7 kg
Peso bruto	1,2 kg
Classe de proteção	IP 43
Carcaça	plástico ABS
Interface de comunicação	2×RS232, USB-A, USB-B, Ethernet, 4 IN / 4 OUT (digital), Wi-Fi^®
Fonte de alimentação	100 – 240 V AC 50/60 Hz
Fonte de alimentação opcional	bateria interna recarregável
Tempo de operação com baterias	tempo de operação até 5 h
Quantidade máxima de unidades de verificação	6000 e
Voltagem mínima por unidade de verificação	0,4 µV
Tensão máxima por unidade de verificação	3,25 µV
Impedância mínima da célula de carga	50 Ω
Impedância máxima da célula de carga	1200 Ω
Tensão de excitação da célula de carga	5V DC
Aumento máximo até sinal	39 mV
Conexão de células de carga	4 ou 6 fios + blindagem
Temperatura de operação	-10 – +40 °C
Faixa múltipla	SIM
Número máximo de plataformas	1

Vídeos

Complete Solutions for Mass Measurement in Pharma Industry

Funções

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g ± 5 g

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.

Replaceable unit

Weight function to change the weight unit.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

Documentação

Ficha técnica