Basamento in acciaio inox con rampa di carico H315.4N.300.H4

Codice prodotto: WP-234-0011

Seleziona modelli:

✓ Select all

Vista

Salva

Voglio saperne di più

Caratteristiche generali

I basamenti con cella di carico in acciaio inox e rampa di carico sono largamente utilizzati nei macelli, nelle industrie ittiche, in quelle farmaceutiche, cosmetiche e chimiche.
I basamenti serie H315/4N sono realizzati interamente in acciaio inox ed equipaggiati con un indicatore anch’esso in acciaio inox serie PUE H315 connesso con un cavo di lunghezza adeguata.

I basamenti con rampa di carico sono realizzati in acciaio inox tipo OH18N9 e con grado di protezione IP 66 / 69. Su richiesta sono realizzabili in una versione avanzata in acciaio inox anti corrosione

I basamenti sono disponibili in versione „dual range” o doppia scala con un minimo sovrapprezzo.

Specifiche

Portata massima [Max]	300 kg
Portata minima [Min]	2 kg
Divisione [d]	100 g
Campo di tara	-300 kg
Massima leggibilità per bilance non verificate	50 g
Classe OIML	III
Display	4,3” LCD (backlit)
Lunghezza del cavo	3 m
Dimensione piatto	1500×1500 mm
Dimensioni del pacco L x P x A	1900×1600×600 mm
Mass scala con indicatore	270 kg
Punteggio IP	IP 66 / 69 construction, IP 66 / 67 / 69 terminal
Interfaccia	RS232, USB
Interfacce opzionali	RS232 or RS485 or 4IN/4OUT or Ethernet or analog output 4-20 mA
Alimentatore	100 – 240 V AC 50/60 Hz
Alimentatore opzionale	internal rechargeable battery
Tempo operativo delle batterie	max 7h
Ambiente di lavoro	-10 – +40 °C
Umidità relativa	10% – 85% RH no condensation

Additional fee
for verification

Funzioni

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Internal battery

Internal and rechargeable battery of SLA 6 V type (sealed lead acid) enables device operation without connecting the device to the mains (9h operation). The weighing instrument controls battery status and displays a respective pictogram on the screen.

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Documentazione

Data Sheet

Vista

Salva

Choose more product:
Vista

Vista

Salva

Accessori

Cavo PT0020.10

Cavo PT0020

Cavo PT0020.5

Cavo PT0443