AP-12.1.5Y Automatic Device for Multichannel Pipette Calibration

The AP-12.1.5Y is the first automatic device designed to calibrate single- and multi-channel micropipettes with [d] 1 µg, in accordance with ISO 8655 requirements. Pipette calibration can be performed in the volume range from 0.5 μl a maximum of 12 channels of fixed and variable volume pipettes.

The impressive calibration readability is the result of the co-called separation chamber which stabilizes the measurement path and protects it from excessive air movement. This is a guarantee of high precision measurements.

AP-12.1.5Y

guarantees the comfort of work. The ergonomic design of the device makes it possible to empty weighing vessels, and their overfilling is signalled by Ambient Light. When calibrating a multichannel pipette, a pump is used to simultaneously remove water from four vessels, greatly reducing the time required for pipette calibration.

Other factors that affect the ergonomics of work:

compact, mobile design
clear, intuitive multilingual menu
data security
transfer of results directly to the customer’s computer application
internal procedure report
automatic periodic adjustment of the device.

After emptying a 12-channel pipette, the AP-12.1.5Y checks all channels in a single cycle. In addition to a database of pipette calibration reports, the AP-12.1.5Y includes a database of pipettes that is editable and contains maximum permissible error values according to ISO 8655. The report database, in turn, contains measurements and error values calculated for individual points and volumes. The user determines the format and content of the reports.

The AP-12.1.5Y monitors the ambient conditions using calibrated sensors: THB S (ambient conditions measurement) and THB W (liquid temperature measurement), in accordance with ISO 8655. To calibrate the device with mass standards, the weighing pan must be replaced with a pan dedicated to checking and calibrating the balance (both are included in the standard equipment).

When purchasing the AP-12.1.5Y, you get:

two calibrated sensors: THB S and THB W,
two weighing pans: standard, and for balance test and calibration,
a pump equipped with two nozzles: to draw water from one container or from four containers at once,
a brush,
a pincette,
a vessel for the liquid,
the Calibration Certificate for the balance.

Specifiche

Portata massima [Max]	18 g
Divisione [d]	1 µg
Campo di tara	-18 g
Ripetibilità standard [5% Max]	2,8 µg
Ripetibilità standard [Max]	3 µg for a single-channel balance 4 µg for a multichannel balance
Peso standard minimo (USP)	2 mg
Peso standard minimo (U = 1%, k = 2)	0,2 mg
Linearità	±0,01 mg
Tempo di stabilizzazione	max 10 s
Calibrazione	internal (automatic)
Tempo di misurazione tipico per una pipetta a 12 canali con volume costante, secondo ISO 8655 (per d=10 µg)*	under 20 minutes
Tempo di misurazione tipico per una pipetta a 12 canali con volume variabile, secondo la norma ISO 8655 (per d=10 µg)*	under 60 minutes
Volume massimo del piatto	4,5 ml
Display	10″ graphic colour touchscreen
Dimensione piatto	ø26 + automat
Dimensioni del pacco	605×560×775 mm
Peso netto	17 kg
Peso lordo	23 kg
Interfaccia	2×USB-A, USB-C, HDMI, Ethernet, Wi-Fi^®, Hotspot
Ambiente di lavoro	+10 – +40 °C
Velocita di variazione della temperatura	±0,3 °C / 1 h (±1 °C / 8 h)
Umidità relativa	20% – 80%
Velocita di variazione della umidità relativa	±1% / h (±4% / 8 h)

*Dipende dalle condizioni della stanza e dalla competenza dell'utente.

360°

Video

New Menu Language in 5Y Series Balances: Japanese

AP-12 Automatic Calibration of Multichannel Pipettes in Your Hands

AP-12.5Y – Speed, Process Automation, Cost Reduction

ELLIPSIS – New Balance by RADWAG

ELLIPSIS – Cutting Edge, Innovative, New

Talk to it. Voice Commands in New ELLIPSIS Balance by RADWAG

310 ELLIPSIS – Scan or Tap to Log In

Remote VPN Support on ELLIPSIS Balances

ELLIPSIS – Unlimited Connections

AP-12.5Y Quick and Easy Single-Channel Pipettes Calibration (Tutorial)

AP-12.5Y Quick and Easy Multi-Channel Pipettes Calibration (Tutorial)

AP-12.5Y Quick and Easy Checking and Calibrating (Tutorial)

Funzioni

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.

Pipettes Calibration

Function verifying correctness of piston pipettes functioning, the verification is performed via gravimetric measurement of the excreted liquid. Pipettes calibration may be either a stand-alone module or it may be operated

Air density correction

Function performing correction of mass measurement indication, wherein the air density is taken into account. It is used in balances with reading unit < 0,01 mg.

Ambient conditions monitoring

The possibility of cooperation with the THBR 2.0 system

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

Documentazione

Data Sheet

Vista

Salva

Choose more product:
Vista

Vista

Salva

User manual Web Editor

Vista

Salva

(1.60 MB)

User Manual

Vista