Balanza de precisión C32.10.PM

Balanzas PM RADWAG

Precisión de laboratorio en condiciones industriales.

La tecnología mejorada

Posibilidad de pesar cargas de hasta 120 kg en un platillo grande con alta precisión y buena repetibilidad,
mínimo error de excentricidad en todo el rango,
medición rápida y estable (alcanzable en 1 segundo),
estabilidad de los parámetros en el tiempo y en el transporte,
dimensiones del platillo de pesaje adaptadas a la precisión de la balanza

son los sellos distintivos de las balanzas PM de RADWAG. Todo esto es el resultado de la aplicación de un sistema de medición innovador basado en la tecnología mejorada RADWAG
MONO
BLOCK^® .

El cambio de la estructura monobloque permitió trabajar con una precisión de 0,01 g con una capacidad de carga de 20 kg y de 0,2 g con una capacidad de carga de 120 kg, repetibilidad a partir de 0,01 g y resistencia a los cambios de las condiciones ambientales.

Las balanzas PM también son:

construcción sólida basada en un monobloque más grande y alto,
sistema de protección de sobrecarga de 4 puntos incorporado,
grado de protección IP 43,
calibración interna,
Pantalla de color 5",
fácil puesta en marcha, manejo intuitivo y ergonomía de trabajo.

Aplicación

Las balanzas PM no solo garantizan una lectura precisa y una medición rápida, sino que también son universales y, por lo tanto, se pueden utilizar en muchos sectores industriales.

La dosificación, la formulación y el contaje de piezas son solo algunas de las posibles aplicaciones de estos versátiles dispositivos.

Las balanzas PM encontrarán destinatarios allí donde se necesiten dispositivos de pesaje de alta precisión y gran capacidad de carga.

Pesaje debajo del platillo

Las balanza compradas después del 15 de febrero de 2023 permitirán el pesaje debajo del platillo en cualquier momento después de comprar el dispositivo. Simplemente compre un gancho dedicado.

* RFID ISO/IEC 14443 Type A, 13,56 MHz

Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications

Datos tecnicos

Maxima capacidad [Max]	10 kg
Minima capacidad	0,5 g
Precarga	1 kg
Legibilidad [d]	0,01 g
División de legalización [e]	0,1 g
Rango de tara	-10 kg
Pesada mínima usp	8,2 g
Pesada mínima	0,82 g
Repetibilidad (Max)	0,01 g
Repetibilidad (5% Max)	0,004 g
Linealidad	±0,025 g
Tiempo de estabilización	1 s
Calibración	interna (automatica)
Clase OIML	II
Sistema de nivelación	manual
Pantalla	5” gráfico color
Dimensión de platillo	200×185 mm
Dimensiones de embalaje	520×520×280 mm
Masa neta	10 kg
Masa bruta	13,5 kg
Grado de protección	IP 43
Conectividad	2×RS232, USB-A, USB-B, Ethernet, 4 IN / 4 OUT (digitales), Wi-Fi^®
Alimentacion	Adapter: 100 – 240V AC 50/60Hz 0,6A; 12V DC 1,2A Balanza: 10 – 12V DC 1A max
Temperatura de trabajo	+10 – +40 °C

Additional fee
for verification

La repetibilidad se expresa como una desviación estándar de 10 posiciones de carga.
El tiempo de estabilización depende de las condiciones externas y la dinámica de colocar los pesos en el platillo; especificado para el perfil FAST.
Precarga – un valor igual a ±10% de la carga máxima [Max] de la balanza verificada. Es posible poner en marcha la balanza con la masa colocada sobre el platillo igual al valor máximo de precarga.

360°

Vídeos

Impresión fácil con las impresoras térmicas de recibos Wifi® de RADWAG

Complete Solutions for Mass Measurement in Pharma Industry

Funciones

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.

Under-pan weighing

The solution enables weighing with use of a stand, which is advisable for loads of non-standard shapes and dimensions and those that generate magnetic field.

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of under-pan weighing. Tested load of significant size may be measured this way.

Replaceable unit

Replaceable units.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

Documentación

Tarjetas de productos

Data Sheet