Sistema de dosagem LDS.1.520.5Y.A

✆
Balanças de laboratório
Balanças industriais
Plataformas CPE
Checadoras de peso
Comparadores de massa
Pesagem de filtro
Calibração de micropipetas
Pesagem de stent
Pesos padrão
Mesas de pesagem
Detectores de metais
Módulos de pesagem
Acessórios
Software
Selected language Português (Brasil)
Início > Produtos > > > Sistema de dosagem LDS.1.520.5Y.A
Sistema de dosagem LDS.1.520.5Y.A
This image is for reference only.

Sistema de dosagem LDS.1.520.5Y.A

Código do produto: WL-601-0010
Alterar o modelo (9)
done
Sistema de dosagem LDS.1.520.5Y.A
Max: 520gd: 0,1mg

⤢

 ø100mm
expand_more
Sistema de dosagem LDS.1.52.5Y.A
Max: 52gd: 0,01mg

⤢

 ø90 prato de pesagem aberto + ø85 (opcional)mm
Sistema de dosagem LDS.1.82/220.5Y.A
Max: 82 / 220gd: 0,01 / 0,1mg

⤢

 ø90 mm prato de pesagem aberto + ø85 mm (opcional) + ø68 mm (opcional) com adaptador XA100-2 + ø36 mm (opcional) com adaptador XA17-2
Sistema de dosagem LDS.1.110.5Y.A
Max: 110gd: 0,01mg

⤢

 ø90 prato de pesagem aberto + ø85 (opcional)mm
Sistema de dosagem LDS.1.120/250.5Y.A
Max: 120 / 250gd: 0,01 / 0,1mg

⤢

 ø90 mm prato de pesagem aberto + ø85 mm (opcional) + ø68 mm (opcional) com adaptador XA100-2 + ø36 mm (opcional) com adaptador XA17-2
Sistema de dosagem LDS.1.210.5Y.A
Max: 210gd: 0,01mg

⤢

 ø90 prato de pesagem aberto + ø85 (opcional)mm
Sistema de dosagem LDS.1.220.5Y.A
Max: 220gd: 0,1mg

⤢

 ø100mm
Sistema de dosagem LDS.1.310.5Y.A
Max: 310gd: 0,1mg

⤢

 ø100mm
Sistema de dosagem LDS.1.320.5Y.A
Max: 320gd: 0,05mg

⤢

 ø90 prato de pesagem aberto + ø85 (opcional)mm
Capacidade máxima [máx]: 520 g
Resolução [d]: 0,1 mg

close
Wybierz modele:
✓ Sistema de dosagem LDS.1.52.5Y.A
✓ Sistema de dosagem LDS.1.82/220.5Y.A
✓ Sistema de dosagem LDS.1.110.5Y.A
✓ Sistema de dosagem LDS.1.120/250.5Y.A
✓ Sistema de dosagem LDS.1.210.5Y.A
✓ Sistema de dosagem LDS.1.220.5Y.A
✓ Sistema de dosagem LDS.1.310.5Y.A
✓ Sistema de dosagem LDS.1.320.5Y.A
✓ Sistema de dosagem LDS.1.520.5Y.A
✓ Selecionar tudo
Mostre-me
Baixar
Quero saber mais
Visão geral

 
Os sistemas de dosagem de líquidos LDS.1.5Y da RADWAG são soluções avançadas projetadas para a dosagem automática e precisa de líquidos por meio da medição de massa. Equipados com balanças da série 5Y e um sistema de controle em malha fechada com realimentação, os sistemas monitoram continuamente a quantidade de líquido dosada e interrompem automaticamente o processo quando o valor-alvo é atingido. Duas bombas mantêm a pressão estável, garantindo a precisão e a repetibilidade da dosagem.

Os sistemas oferecem uma ampla faixa de dosagem, controle eletrônico do processo e altura ajustável do cabeçote de dosagem, permitindo o uso de recipientes de diferentes tamanhos. São destinados a aplicações laboratoriais, farmacêuticas e químicas, especialmente onde a precisão, o controle e a repetibilidade da dosagem são essenciais.
 
 
Ficha Técnica
Capacidade máxima [máx]

520

g

Carga mínima

-

Resolução [d]

0,1

mg

Faixa de tara

-520

g

Peso mínimo (USP)

140

mg

Peso mínimo (U=1%, k=2)

14

mg

Repetibilidade padrão [5% máx.]

0,07

mg

Linearidade

±0,5

mg

Desvio de carga excêntrica

0,4

mg

Sensibilidade até desvio de tempo

1×10⁻⁶/Ano×Rt

Tempo de estabilização

1,3

s

Ajuste

interna (automática)

Sistema de nivelamento

automático – Sistema de Nível de Reflex

Display

10″ gráfico colorida tela touchscreen

Câmara de pesagem

automática

Portas da câmara de pesagem

automático

Dimensões da câmara de pesagem

200×170×220

mm

Dimensões até prato de pesagem

ø100

mm

Classe de proteção

IP 43

Interface de comunicação

2×USB-A, USB-C, RS 232 (COM3), HDMI, Ethernet, Wi-Fi®, Hotspot

Fonte de alimentação

Adaptador: 100 – 240V AC 50/60Hz 1A Max; 15V DC 2,4A
Balança: 12 – 15V DC 1,6A max; 10 – 19W**

Temperatura de operação

+10 – +40

°C

Taxa de mudança de temperatura operacional

±0,3 °C / 1 h (±1 °C / 8 h)

Umidade relativa

20% – 80%

Taxa de mudança de umidade relativa

±1% / h (±4% / 8 h)

CE
2 anos de garantia
Funções
Autotest

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g ± 5 g
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
Under-pan weighing

Under-pan weighing

The solution enables weighing with use of a stand, which is advisable for loads of non-standard shapes and dimensions and those that generate magnetic field.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Pipettes Calibration

Pipettes Calibration

Function verifying correctness of piston pipettes functioning, the verification is performed via gravimetric measurement of the excreted liquid. Pipettes calibration may be either a stand-alone module or it may be operated
Air density correction

Air density correction

Function performing correction of mass measurement indication, wherein the air density is taken into account. It is used in balances with reading unit < 0,01 mg.
Automatic sliding door

Automatic sliding door

Automatic side panes opened via touch-free IR sensors.
Density determination

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of  under-pan weighing. Tested load of significant size may be measured this way.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Ambient conditions monitoring

Ambient conditions monitoring

The possibility of cooperation with the THBR 2.0 system
Statistical Quality Control

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
Packaged Goods Control

Packaged Goods Control

Pre-packaged Goods Control mode enables to collect weighings from RADWAG-designed weighing instruments, carry out control and generate PGC reports. Different types of weighing instruments can be combined into a network. The control can be started on a balance or via computer software. It is automatically finished after a respective quantity of packages is verified.
Collected data allows you to assess quality of produced pre-packaged goods and their conformity with:
- internal quality control system;
- 'Pre-Packaged Goods' regulation of 7th May 2009 (Journal of Laws No 91, item 740), on the requirements concerning quantity inspection of pre-packaged goods control, which inspection is to be carried out by means of random selection of the measurements results and sending those results to pre-packaged goods control procedure.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Wi-Fi®

Wi-Fi®

Thanks to wireless communication between the computer and a balance, it is possible to use a balance inside a laminar flow hood and a fume cupboard.

Documentação
Ficha técnica
Data Sheet Data Sheet
Data Sheet

Mostre-me
Mostre-me
Baixar
Baixar

Choose more products:
Mostre-me Mostre-me BaixarBaixar
Acessórios
R-LAB

Acessórios

Newsletter

Assine a newsletter se quiser receber notícias da RADWAG.

Ver mais
Oferta
Produtos
Novos produtos
Suporte ao cliente
Calibração
Manuais do usuário
Baixar
Serviço
Assistência remota
Catálogos
Publicações
Blog
Registo de produtos
Preencha a solicitação de serviço de RMA
Webinars
Radwag
Empresa
Sistema de qualidade ISO
Certificados de produtos
Prêmios e reconhecimentos
Exposições e Conferências
Contato
Política de privacidade
Balanças e Plataformas Radwag
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 60 00
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2026 Balanças e Plataformas Radwag. Todos os direitos reservados.

Selecione um idioma

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on Deutsch Deutsch
Change language page on English English
Change language page on Español Español
Change language page on Français Français
Change language page on Italiano Italiano
Change language page on Japanese (日本語) Japanese (日本語)
Change language page on Polski Polski
Change language page on Türkiye Türkiye
Česky
Change website to USA USA
Change language page on 中文 中文
Presentations Presentations Presentations
Subscribe Subscribe Subscribe
Radwag in Facebook Radwag in Facebook Facebook
Radwag in YouTube Radwag in YouTube Youtube
Radwag in Vimeo Radwag in Vimeo Vimeo
Radwag in LinkedIn Radwag in LinkedIn LinkedIn
Blog Radwag Blog Radwag Blog
Slide to go back ↩