Balança de precisão 200g/2000g 0,001/0,01g

Balança de precisão PS 200/2000.R2.H

A balança PS R2.H representa um novo patamar entre as balanças de precisão padrão. Ela reúne todas as vantagens das balanças da série R e se destaca pela capacidade de operar em condições adversas (gotas de água caindo em qualquer ângulo ou alta concentração de poeira), em conformidade com o grau de proteção IP 54.

Tela LCD

As balanças série PS.R2.H representam um novo padrão em balanças de precisão. Elas apresentam um novo visor LCD legível que permite uma apresentação mais clara do resultado da pesagem. Além disso, o visor possui uma nova linha de informações de texto que permite exibir mensagens e dados adicionais, como nome do produto ou valor de tara.

Interfaces

A balança pode interagir com o computador por meio de uma interface USB, desde que um software complementar tenha sido instalado (respectivo driver). O driver pode ser baixado do site da RADWAG – link SOFTWARE ou seção SUPORTE

A balança foi equipada com várias interfaces de comunicação, instaladas em um compartimento hermético e separado da balança. A estrutura da balança é feita de plástico, enquanto o prato é de aço inoxidável.

A balança é compatível com o sistema E2R Ewidencja.

Pesagem por baixo da balança

Instrumentos de pesagem adquiridos após 15 de fevereiro de 2023 permitirão a pesagem sob o prato a qualquer momento após a compra. Basta encomendar um gancho dedicado.

Sistema THBR 2.0

Cooperação com o sistema THBR 2.0 para monitoramento de condições ambientais.

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g ± 5 g

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of under-pan weighing. Tested load of significant size may be measured this way.

Capacidade máxima [máx]	200 / 2000 g
Carga mínima	20 mg
Resolução [d]	0,001 / 0,01 g
Faixa de tara	-2000 g
Peso mínimo (USP)	1 g
Peso mínimo (U=1%, k=2)	0,1 g
Repetibilidade padrão [5% máx.]	0,0005 / 0,005 g
Repetibilidade (máx.)	0,001 / 0,01 g
Linearidade	±0,002 / 0,02 g
Tempo de estabilização	2 / 1,5 s
Ajuste	interna (automática)
Sistema de nivelamento	manual
Display	5,3” LCD (retroiluminado)
Dimensões até prato de pesagem	ø100 mm
Dimensões da embalagem L x P x A	475×380×345 mm
Peso líquido	4,5 kg
Peso bruto	6,5 kg
Classe de proteção	IP 54
Interface de comunicação	2×RS232¹, USB-A, USB-B, Wi-Fi^® (opcional)
Fonte de alimentação	Adaptador: 100 – 240V AC 50/60Hz 0.6A Max; 12V DC 1,2A Balança: 12 – 15V DC 0,7A max; 3 – 5,5W*
Consumo de energia	4 W
Temperatura de operação	+10 – +40 °C
Umidade relativa	40% – 80%

Balança de precisão PS 200/2000.R2.H

Balança de precisão PS 200/2000.R2.H

Tela LCD

Interfaces

Autotest

Dosing

Percent Weighing

Totalizing

Parts counting

Peak hold

Statistics

Checkweighing

Under-pan weighing

GLP Procedures

Animal weighing

Density determination

Acessórios

Acessórios

Acessórios

Acessórios

Acessórios

Acessórios

Acessórios

Acessórios

Acessórios

Acessórios

Acessórios

Acessórios

Acessórios

Acessórios

Acessórios

Acessórios

Newsletter

Selecione um idioma