English

Español

XA 210.4Y PLUS Analytical Balance

XA 210.4Y PLUS Analytical Balance in Laboratory Balances
This image is for reference only.

Product code: WL-107-0161
Request for quotation

Overview

Maximum capacity [Max]: 210g
Readability [d]: 0.01mg

The XA 4Y PLUS analytical

balances

provide the best minimum

weight

in the market and are intended for the most complex

weighing

of small masses. The devices are highly resistant to ambient conditions and their ergonomic design ensures convenient operation.

Innovative 2-Point Adjustment System
The 2-point adjustment system guarantees the most accurate measurement and minimized linearity errors, this ensures reliable measurement results for the whole range.

Smart Min Weight
Unique design solutions of the XA 4Y PLUS analytical

balances

guarantee the best value of minimum

weight

among professional-class solutions available on the market.

Faster Measurement with the New CPU
The 4Y balances are equipped with Dual Core 2× 1 GHz processor and offer new possibilities of fast operation assuring short indication stabilization time at a respective repeatability.

16 GB Memory - New Possibilities of Data Management
Upgraded 16 GB memory enables record of measurement data in a form of reports, time and statistical graphs.

Second to None Repeatability and Compliance with USP
The highest measurement accuracy, repeatability of sd ≤ 0.08 mg and compliance with USP (Chapter 41 and 1251) make the 4Y series

balance

a new benchmark of

mass

measurement quality.

Ergonomics and Safety of Operation
Spacious

weighing

chamber and large open-door clearance allow easy access to the weighing pan and facilitate use of laboratory glassware of various sizes and dimensions. Special design of the weighing chamber glass pane guides (no edges) facilitates control of cleanliness during everyday operation. Panes disassembly does not require use of any tools, which makes keeping the device clean easy.

LevelSENSING System
The in-built sensors measure tilt and display graphic message on the weighing device screen. Levelling system facilitates adjustment, controls the level state, and informs about level deviations, all this in accordance with GLP and GMP.

21 CFR Part 11 Compliance Module
All XA 4Y PLUS analytical balances are complaint with 21 CFR part 11 regulations and with provisions of EU GMP part 4, annex 11. They are equipped with a number of security and monitoring functions that control work of particular operators and an electronic signature.

Full data protection:
  • advanced password settings
  • verification of log in correctness
  • assigning operators with individual permissions
  • auto logout
  • electronic signature, e.g. for series of measurements
  • granting/denying access to data management
  • backup
  • modifications saved to Audit Trail file
Mobile Control
Wi-Fi® offers possibility to send data from 4Y

balance

to a mobile iOS or Android device, via special data management apps. Wireless communication between the

indicator

and the weighing instrument enables operating the XA 4Y PLUS balance that is placed inside a laminar flow hood or fume cupboard.

Data Safety
All 4Y series balances feature internal ALIBI memory guaranteeing safety and automatic record of measurements, it also offers possibility to preview, copy and archive data. ALIBI memory enables saving unlimited quantity of records within administrator-determined time.

Defined Profiles
Four predefined profiles enable automatic customization of balance parameters.
  • FAST – the measurement result is obtained in a very short time
  • FAST DOSING – the balance quickly reacts to

    mass

    changes, especially useful for dosing or adding more product to the dispensed portion
  • PRECISION - balance settings providing the minimum standard deviation sd ≤ 0.08,
  • USER - customization of the parameters in accordance with operator's requirements.
Ambient Condition Monitoring
The 4Y series balances feature a unique solution for control of ambient conditions at the balance workstation, i.e. special measuring sensor integrated into the balance. The system monitors temperature, humidity, pressure and air density. Upon exceeding standards determined by the administrator, a respective message is displayed on the balance home screen.
It is possible to connect additional THB sensors to the balance.
Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications

Wi-Fi® is a registered trademark of Wi-Fi Alliance®.

Videos

RADWAG Remote Desktop - Windows 10
RADWAG Remote Desktop
4Y Balances: Video-Guidance and an on-screen manuals
4Y Series RADWAG Balances

Features

Electronic
level indicator
Functions:
  • ALARM function
  • graphic level indicator
  • programmable acceptable tilts

Electronic
level indicator

Functions:
  • ALARM function
  • graphic level indicator
  • programmable acceptable tilts
Data exchange through
USB storage devices
  • update balance software
  • export weighing data
  • export/import databases
  • export/import balance settings
  • exchange data between balances

Data exchange through
USB storage devices

  • update balance software
  • export weighing data
  • export/import databases
  • export/import balance settings
  • exchange data between balances
Infrared
proximity sensors
Optional functions:
  • PRINT function
  • TARE function
  • sensor's sensitivity adjustment

Infrared
proximity sensors

Optional functions:
  • PRINT function
  • TARE function
  • sensor's sensitivity adjustment
Portability
Extra option:
Balances with
a wireless terminal

Portability

Application:

Elimination of extra sources of vibration
Using wireless terminal facilitates elimination of additional vibrations resulting from daily operation on a balance. Owing to that, balances with highest resolutions might be used without the need of dedicated weighing workstations.

Convenience and comfort of weighing in fume cupboards and laminar flow cabins
Wireless communication between a terminal and a weighing module makes balance operation more comfortable and safer.

Balance isolation form influence of environmental conditions
Wireless communication allows to either place the weighing module inside a draft shield or to isolate it from the operator. This allows to weight toxic substances without putting operator's health or life at risk.
Interfaces
  • Ethernet
  • 2×USB
  • 2×RS 232
  • 4 in / 4 out
  • WiFi 2,4GHz b,g,n

Interfaces

  • Ethernet
  • 2×USB
  • 2×RS 232
  • 4 in / 4 out
  • WiFi 2,4GHz b,g,n
Removable Weighing Chamber
Fully removable weighing chamber requiring use of no tools

Removable Weighing Chamber

  • fully removable components of the weighing chamber
  • uncomplicated and fast disassembly requiring use of no tools
  • latch-type system for components assembly
  • easy maintenance and cleaning
2-Point Adjustment
The highest measurement accuracy guaranteed.

2-Point Adjustment

It minimizes linearity errors simultaneously providing reliable indications for the whole weighing range.
Smart Min Weight
Minimum Sample Weight improved by 30%.

Smart Min Weight

PLUS balances automatically adjusts resolution of the range to the currently weighed mass.
Compliance with 21 CFR Part 11
Various functions for protecting and monitoring of balance operation.

Compliance with 21 CFR Part 11

Full data protection is ensured by:
  • advanced password settings,
  • verification of log-in operation correctness,
  • assigning permissions to operators,
  • auto log out,
  • electronic signature, e.g. for series of measurements,
  • granting/denying access to data management
  • data backup,
  • modifications saved to Audit Trail file.

Functions

Autotest

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
Under-pan weighing

Under-pan weighing

The solution enables weighing with use of a stand, which is advisable for loads of non-standard shapes and dimensions and those that generate magnetic field.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Pipettes Calibration

Pipettes Calibration

Function verifying correctness of piston pipettes functioning, the verification is performed via gravimetric measurement of the excreted liquid. Pipettes calibration may be either a stand-alone module or it may be operated
Air density correction

Air density correction

Function performing correction of mass measurement indication, wherein the air density is taken into account. It is used in balances with reading unit < 0,01 mg.
Density determination

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of  under-pan weighing. Tested load of significant size may be measured this way.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Ambient conditions monitoring

Ambient conditions monitoring

The possibility of cooperation with the THBR 2.0 system
Replaceable unit

Replaceable unit

Replaceable units.
Statistical Quality Control

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Wi-Fi®

Wi-Fi®

Wi-Fi® offers possibility to send data from balance to a mobile iOS or Android device, via special data management apps. Wireless communication between the indicator and the weighing instrument enables operating the balance that is placed inside a laminar flow hood or a fume cupboard.

Datasheet

Maximum capacity [Max]

210

 g

Minimum load

1

 mg

Readability [d]

0.01

 mg

Tare range

-210

 g

Standard repeatability [5% Max]

0.006

 mg

Standard repeatability [Max]

0.025

 mg

Standard minimum weight (USP)

12

 mg

Standard minimum weight (U=1%, k=2)

1.2

 mg

Permissible repeatability [5% Max]

0.012

 mg

Permissible repeatability [Max]

0.035

 mg

Linearity

±0.1

 mg

Eccentric load deviation

0.1

 mg

Stabilization time

4

 s

Adjustment

internal (automatic)

 

OIML Class

I

 

Display

5.7” resistive colour touchscreen

 

Communication interface

2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digital), Wi-Fi®

 

Power supply

100 ÷ 240 V AC 50 / 60 Hz

 

Power consumption max.

10 W

 

Operating temperature

+10 ÷ +40

 °C

Relative humidity

40% ÷ 80%

 

Weighing chamber dimensions

173×190×228

 mm

Weighing pan dimensions

ø90 + ø85 (option)

 mm

Packaging dimensions

720×385×485

 mm

Net weight

9.8

 kg

Gross weight

14.3

 kg

Repeatability is expressed as a standard deviation from 10 cycles of mass standard weighing.
Stabilization time depends on the ambient conditions and the dynamics of weighing pan loading; specified for FAST profile.

Documentation

Technical specification
Publications and teaching materials
User Manual - 4Y series balances
(6.51 MB)
Save See the publication
Data Sheet
(1.61 MB)
Save See the publication
Stainless Steel in RADWAG products. Standard and special applications
(2.44 MB)
Save See the publication
XA 4Y PLUS Analytical Balances
(10.91 MB)
Save See the publication

Accessories

Automatic Pipettes
"Pipettes" PC Software
Adapters for Pipettes Calibration
Workstation for Pipettes Calibration
Granite Antivibration Tables
Antivibration Tables for Laboratory Balances
Professional weighing table
Audit Trail Reader
E2R System
Label Editor R02
R.Barcode
R-LAB
RAD-KEY
RADWAG Connect
RADWAG Remote Desktop
LabVIEW Driver
Under-Pan Weighing Rack
Density determination kit
Receipt Printer
Label Printers
Antistatic ionizer
THBR 2.0 System - Ambient Conditions Monitoring
USB Hubs
Moxa UPort 1110 Converter
RS 232, RS 485 cables
RS 232 cables (scale - EPSON printer)
Protective cover for balances
Barcode scanners

Accessories

Product name

Overview

DS2208 Barcode Scanner

DS2208 barcode scanner, as a new generation of LS2208 series, is a response to the tills and retail outlets need to read barcodes directly from mobile phones' s ...

LS2208 Barcode Scanner

LS2208 barcode scanner is a manual device designed for operation in adverse industrial conditions. It integrates with RADWAG indicators, PUE C/41H, PUE 5, PU ...

PD9330 Barcode Scanner

The Datalogic product range is now extended by series of PowerScan™ 9300 laser scanners. The device combines excellent functionality of PowerScan series with ne ...

PD9530 Barcode Scanner

Datalogic PowerScan PD9530 is a quick and reliable scanner intended for area imager barcodes. The scanner ensures omnidirectional readout of barcodes, even from ...

PM9300 Barcode Scanner

PowerScan™ PM9300 is a wireless version of PD9300 scanner. There are three types of the device: PM9300 – wireless model, PM9300-D – intermediate model with d ...

PM9500 Barcode Scanner

PM 9500 is a robust barcode scanner intended for industry. The scanner is equipped with 'Datalogic STAR Cordless' system which ensures excellent quality of wire ...

PM9300-D Barcode Scanner

PowerScan™ PM9300 is a wireless version of PD9300 scanner. There are three types of the device: PM9300 – wireless model, PM9300-D – intermediate model with d ...

PD9330-AR Barcode Scanner

The Datalogic product range is now extended by series of PowerScan™ 9300 laser scanners. The device combines excellent functionality of PowerScan series with ne ...

PM9300-DK Barcode Scanner

PowerScan™ PM9300 is a wireless version of PD9300 scanner. There are three types of the device: PM9300 – wireless model, PM9300-D – intermediate model with d ...

Holders for laboratory flasks
Holders for test tubes and filters
Anti-Draft Chamber for XA 4Y Balances
Displays
Power Adapters

Additional modules

21 CFR Part 11 Compliance Module3
☎ Call us now
✉ Get a quote

© 2018 RADWAG USA L.L.C.. All rights reserved.

All proprietor's rights do the materials placed in the server are in possession of RADWAG USA L.L.C. and are not to be copied, processed and utilized in commercial purpose unless agreed with RADWAG USA L.L.C. .

RADWAG USA L.L.C.
19599 NE 10th Ave., #E, North Miami Beach, FL, 33179 USA
tel.: 13056513522