MW-01-A3 Mass Converter

Product code: WX-016-0280

Change the model (7)

done

expand_more

MW-01-A4 Mass Converter

MW-01-A5 Mass Converter

MW-01-A6 Mass Converter

MW-01-A7 Mass Converter

MW-01-A1 Mass Converter

MW-01-A2 Mass Converter

Select models:

✓ MW-01-A4 Mass Converter

✓ MW-01-A5 Mass Converter

✓ MW-01-A6 Mass Converter

✓ MW-01-A7 Mass Converter

✓ MW-01-A1 Mass Converter

✓ MW-01-A2 Mass Converter

✓ MW-01-A3 Mass Converter

✓ Select all

The MW-01-A mass converter is designed to be a component of an industrial load cell scale. Depending on the needs, communication with the mass converter can be carried out via the following communication interfaces: RS232, RS485, Ethernet, Ethernet IP, Profibus or Profinet. The MW-01-A mass converter is compatible with indicators and PC.

Operation of the MW-01-A mass converter via PC is carried out using „MW Manager” software.

Datasheet

OIML Class	II or III
Maximum quantity of verification units	10000 e
Minimum volatge per verification unit	0.5 µV
Maximum voltage per verification unit	1.95 µV
Minimum load cell impedance	50 Ω
Maximum load cell impedance	1200 Ω
Load cell excitation voltage	5V DC
Maximum increase of signal	19.5 mV
Connection of load cells	4 or 6 wires + shield
Protection class	IP 66
Housing	aluminum
Communication interface	RS232, RS485, 3×IN / 3×OUT
Power supply	100 – 240 V AC 50/60 Hz
Operating temperature	-10 – +40 °C
Packaging dimensions W x D x H	300×250×130 mm
Net weight	1 kg
Gross weight	1.16 kg
Multiple range	YES
Max number of platforms	1